How to Use: 1.Interface R.J‑45 interface: The transmission medium adopts CAT5 and CAT 6 twisted pair cables. It is recommended to use high‑quality RJ‑45 and well‑made jumpers, which have the function of automatically identifying straight and crossover cables. Optical fiber interface: SC optical fiber interface is duplex type, including TX and RX two interfaces. When two sets of optical converters are connected or connected to a switch through optical fiber interfaces, the optical fibers are in a cross‑connected state, that is, "TX‑RX" and "RX‑TX". 2. Connection Connect network equipment (workstation, hub or switch) Connect to the RJ‑45 socket of the optical converter through twisted pair CAT5. Connect the multi‑mode/single‑mode fiber to the SC/ST/LC fiber interface of the optical module. Turn on the power. The corresponding LED light is on to indicate that the connection is correct. Specification: Item Type: Ethernet Media Converter Standard Protocol: IEEE802.3Z/AB 1000Base-T/SX/LX Transmission Rate: Electrical Interface: 10/100/1000Mbps; Optical Fiber Interface: 1.25Gbps Operating Mode: Full-Duplex Mode or Half-Duplex Mode Power Parameters: 5VDC Ambient Temperature: 0℃-60℃ Relative Humidity: 5%-90% TP Line: 5E, CAT6 Transmission Fiber: Multi-Mode: 50/125, 62.5/125um; Single-Mode: 8.3/125, 8.7/125, 9/125 or 10/125μm Package List: 1 x Ethernet Media Converter 1 x User Manual

Have a wide range of adaptability, and the power socket is an adaptive 10/100/1000M gigabit optical converter. The power socket is an adaptive 10/100/1000M Gigabit optical converter, supporting a working temperature range of 0°C to 60°C. RJ45 Port, Full Duplex or Half Duplex, the transmission medium adopts CAT5 and CAT 6 twisted pair cable. Use high‑quality RJ‑45 and well‑made jumpers, with the function of automatically identifying straight‑through and cross‑wires. Optical fiber interface, SC optical fiber interface is duplex type, including TX and RX two interfaces.