5 in 1 Charging Hub

• Max Power: 1250W (10A Max).
• AC Input: 100-240V 50/60 Hz.
• USB A & C: 5V3.4A (Fast Charging PD 17W Max per port).
• Wireless Charger: Fast Charging PD 15W.
• Cord Length: 6FT.

Dual Alarm Clock Setting

• A short press of the AL1 button toggles the AL1 on or off. When AL1 is activated, the AL1 indicator illuminates. During an AL1 alarm, press AL1 once to halt the alarm, although the alarm remains active.
• To set the alarm, long-press AL1 to enter the alarm-setting mode. The display will flash, allowing you to press UP or DOWN to choose the hour. Press AL1 again to confirm the selected hour and proceed to the minute-setting state. Once the screen is flashing, use UP or DOWN to select the minute. Press AL1 again to confirm the chosen minute, exit the setting mode, and then short-press AL1 once more.
• AL2 can be configured in the same manner as AL1.

Time and Dimmer Setting

• The power-on default LED display brightness is maximum.
• In clock mode, a short press of the DIMMER/SNOOZE/CLOCK button adjusts the LED brightness: once for 2/3 of the maximum, again for 1/3 of the maximum, and once more for the minimum brightness (0).

• To adjust the time, press and hold the DIMMER/SNOOZE/CLOCK button for 2 seconds. The hour will start flashing. Use the UP and DOWN buttons to select the desired hour.
• After adjusting the hour, press the button again to switch to minute adjustment mode. Use the UP and DOWN buttons to set the desired minute. Finally, press the DIMMER/SNOOZE/CLOCK button to complete the time adjustment.

Snooze Function

• When AL1/AL2 is ringing, press the DIMMER/SNOOZE/CLOCK button to temporarily silence the alarm for the preset duration (default is 9 minutes).
• The unit will pause the current alarm tone and enter nap mode. During this mode, AL1/AL2 will flash.
• To exit nap mode, press AL1/AL2 twice while the alarm is still active.