FAQs You May Have:
Q: How to set steering wheel control buttons?
- Find your steering wheel control wire of the original vehicle (KEY1/KEY2 (there is no KEY2 in some car models)/ground wire);
- Connect KEY1 to wheel 1 wire, KEY2 to wheel 1 wire, GND(Black) to GND. (Please refer to the actual harness);
- Click "Setting", Swipe the menu bar to the left, and find the steering wheel control icon;
- The Learning Method of buttons is in the user manual. Save the settings.
* If your car is Digital Steering Wheel Control, then you will need to purchase a CANBUS for your car.
Q: Unable to boot?
If you encounter this kind of problem,please confirm that your car is 16V and below. And then please check your wiring. First, the yellow wire needs to be connected to the positive pole of the battery, the black wire needs to be connected to the negative pole of the battery, and then the red wire needs to be connected to your ACC (car key hole), so as to ensure Your product has sufficient power supply, and the correct connection of each wiring can ensure the normal use of the product.
Q: Can't connect with Bluetooth?
1) Please turn on the Bluetooth of the mobile phone before the car radio is turned on. 2) Please delete the bluetooth record of the mobile phone and re-match the connection.
Q: There is no sound right after installation?
It is usally a wiring error or the original car speaker wire is short-circuited with iron. Here are the steps to check it.
1) Check if the speaker cable is short-circuited, if so, please reconnect the wiring. 2) Check how many speaker cables does the original speaker have. If there are only 2 speaker cables then it means that the original car line does not match our unit. In this case, you need to re-organize the original car line. One speaker must lead to 2 speaker wires; 2 speakers must be have 4 speaker cables, only in this way, the unit can work properly.
Q: FM does not receive the radio station?
1) The antenna plug is not fully inserted, the antenna is disconnect or the line is disconnect. 2) Search channel, on the FM menu page, perform a channel scan search. If the above 2 points do not work, please unplug the antenna plug and find a screwdriver or a metal strip to insert into the antenna port to see if it works or not.