Product introduction: 1, the use of chip TCS3200 PCB board using gold plating process. 2. The TCS230 is an upgraded version of the TCS230 with better results. 3, power supply 3-5V. 4, resist light interference. 5, white LED, can control the light / off. 6, can detect non-luminous object color. 7, PCB size: (L) 33mm * (W) 25mm. 8.Best Detection Range: 10mm. 9.Chip pins all has drawn for standard 100. Package Included: 1 x TCS230 TCS3200 Color Recognition Sensor Module 1 x 8PIN male and female DuPont cable

【Note】: When using a low-speed frequency counter, you can select a small scaling value to match the output frequency of the TCS230 to the counter. 【Output frequency】: The sensor's typical output frequency range is 2 Hz to 500 kHz. The user can select 100%, 20% or 2% output scale factor or power-off mode through two programmable pins. 【Error】: The 16 photodiodes of the same color are connected in parallel and evenly distributed. In the diode array, color position errors can be eliminated. 【Accuracy】: These photodiodes are interdigitated in the chip, which minimizes the inhomogeneity of the incident light radiation, thereby increg the accuracy of color recognition. 【Principle】: TCS230 is an 8-pin SOIC surface mount package, which integrates 64 photodiodes on a single chip. These diodes are divided into four types.