DisplayPort KVM Switch 2 computers Dual Monitors 4K@60Hz

• 2 computers share one set of keyboard, mouse and 2 monitors
• Dual monitors output support and mirrored and extended display
• Switching modes: Button switch and wired remote
• Support wired or wireless keyboard and mouse
• Cross support most major OS including Windows, Linux, Mac
• 6With extra USB 2.0 HUB and audio support.
• Support max up resolution 4K@60Hz,downward compatible.
• Support Displayport 1.2 standard

Installation Proceedures:

1. Power off everything before installation;
2. Computer 1: Connect 2 DP outputs from computer 1 to DP IN 1 A and DP IN 1 B ports; Connect USB A-male to USB 3.0 port on computer 1, and USB B-male to USB 1 input on the KVM switch;
3. Computer 2: Connect 2 DP outputs from computer 2 to DP IN 2 A and DP IN 2 B ports; Connect USB A-male to USB 3.0 port on computer 2, and USB B-male to USB 2 input on the KVM switch;
4. Primary Monitor: Connect primary monitor to DP Out A;
5. Extended Monitor: Connect extended monitor to DP Out B;
6. Keyboard and Mouse: Connect keyboard and mouse into USB keyboard and mouse port respectively;
7. Connect USB peripherals to USB 2.0 ports if needed (optional);
8. After cables being connected, power on the kvm switch first, then monitors, then computers.

Important Note:

• Most of the reasons why only one video output works is because of incorrect connection. Please make sure each computer have 2 DP cables connect to the KVM.
• If it is normal working, then there is a sudden failure, please unplug all the cables and plug again.

• The 2x2 DisplayPort KVM switch has a resolution of up to 4k@60Hz on two displays at the same time.
• Supports HDCP, HDR, Dolby Vision.

• Dedicated mouse & keyboard ports have emulation programming.
• Compatible with keyboards and mice of more brands, but Keyboard software such as Logitech Options, Corsair iCUE, etc conflicts with the emulation, It is not recommended to use, so as not to affect the use effect.

• Dual Monitor DisplayPort KVM Switch comes with a 3.5mm Audio Jack port with a DAC chip inside, which can be inserted into a 3-segment 3.5mm earpiece device, and a 3.5mm microphone interface, which can be inserted into a 3-segment microphone.

• Quickly switch between the 2 computers with just one click of the switch button and no extra operations.
• Not support keyboard switch, avoid hotkey conflicts.
• A button-controlled switch extension cord is presented, so you don’t have to get up and switch easily when you use it.

• When you adjust the placement angle, it will be fixed under the table by itself, it will not slide around, you don't need to adjust it all the time.

• DisplayPort Dual Monitor KVM Switch x1
• 5V Power Supply x1
• USB Cable to PC x2
• Wired Controller x1
• Manual x1