4 Port 4K@60Hz Dual Monitor DisplayPort KVM Switch (DisplayPort+ DisplayPort+DisplayPort+DisplayPort)

• 4 port KVM switch Perfects for hooking up to 4 desktops or laptops to share 1 set of keyboard, mouse and 2 monitors
• This dual monitor DisplayPort KVM switch supports up to 4K@60Hz. It offers an ultra-high definition visual experience.
• Supports DP1.2 with a transfer rate of 18Gbps.
• Compatibility with all computers and other devices with DisplayPort ports.
• Switching modes: Button switch and wired remote.

What's in the box

• (1)4 port USB DisplayPort KVM Switch Dual Monitor
• (2) 4x USB A-USB B Cables
• (3) 1x Switch Button extension cord
• (4) 1x Power Adapter
• (5)1x Manual

Mirror Mode or Extended Mode or Splicing screen mode

This dual monitor KVM Switch Supports Two Mode Switching

1. Extended mode can output two different screens and mirror mode can output two identical screens.

• If you are a designer or illustrator, you can use this mode to see the effect while working.

2. The requirement for this KVM to achieve a dual-screen display is that each PC you connect to has the capability to support a dual or multi-screen display. This has nothing to do with KVM.

Detection method:

• You can connect the computer to 2 monitors directly (not via KVM). If both monitors have an on-screen display, the computer supports a multi-monitor display.

3. Splicing screen mode

• Note:If your graphics card has a splicing screen function, you can use the splicing screen mode.

Connection steps:

• Step 1. Connect the power adapter into the "DC/5V" to the Dual Monitor DP KVM Switch, and the KVM to ensure power supply.
• Connect 2*DP cables+1*USB-B cable between computer 1 and KVM (PC1, DP IN A1, DP IN B1).
• Step 2. Connect 2*DP cables+1*USB-B cable between computer 2 and KVM (PC2, DP IN A2, DP IN B2).
• Step 3. Connect 2*DP cables+1*USB-B cable between computer 3 and KVM (PC3, DP IN A3, DP IN B3).
• Step 4. Connect 2*DP cables+1*USB-B cable between computer 4 and KVM (PC4, DP IN A4, DP IN B4).
• Step 5. Connect 2*DP cables between the KVM (DP OUT A, DP OUT B) and the monitors.
• Step 6. Connect the keyboard, mouse, and USB devices to the USB 2.0 ports on the KVM.
• Step 7. Insert the desktop controller into the "PC1, PC2, PC3,PC4" port to remotely switch between PC1, PC2, PC3, and PC4. Or press the switch button (1, 2, 3, 4)on the KVM to switch.

USB2.0 interface 4 PCs 2 Monitors

• The dual monitor switch has 4 USB 2.0 ports, allows you to share 4 more USB peripherals like keyboard, mouse, printer, scanner, webcam and hard disk between 4 computers.