Camgeet displayport Dual Monitor KVM Switch,2 computers share 2 monitors and 4 USB3.0 devices.

Advantages:

• 2 computers share one set of wired/wireless keyboard, mouse and 2 monitors.
• Dual monitors output support extended and mirror display.
• Support max up resolution 8K@30Hz,4K@144Hz,2560×1440@144Hz,1920x1080P@144Hz,downward compatible.support ultra-wide monitors.
• Switching modes: Button switch and wired remote (1.5m),switch between 2 computers just need 2-4 seconds, fast and convenient.
• Support wired or wireless keyboard and mouse.When use a mechanical gaming keyboard,You need to plug in the DC 5V USB power cable to the KVM to provide sufficient power.
• Cross support most major OS including Windows, Linux, Mac OS.
• Dual displayport KVM switch with 4 USB 3.0 ports for USB devices.

Displayport KVM Switch Dual Monitor Support extended and mirror mode

Important tips:

• For laptops, this KVM switch dual displayport supports USB C docking stations, but the resolution refresh rate may be limited by the docking station, and you may need to connect DC 5V to power the KVM (depending on your docking station).
• The two monitors can only output the video source from one computer (mirror mode or expansion mode), and cannot output the signal source of PC1 and PC2 at the same time.
• The cables(2*DP cable+1*USB cable)connecting PC 1 and PC 2 to the KVM cannot be cross-connected
• The input USB 3.0 ports must be connected, otherwise the output USB devices will not be recognized.because the USB cables not only supply power to the KVM, but also transmits data between the computer and the USB devices.

Each PC must connection 2 DP cables and 1 USB cable to ensure keyboard, mouse and monitors to work correctly.

Connection steps:

Step 1. Connect 2*DP cables+1*USB3.0 cable between PC 1 and KVM (USB 3.0, INPUT A1, INPUT B1).

Step 2. Connect 2*DP cables+1*USB3.0 cable between PC 2 and KVM (USB 3.0, INPUT A2, INPUT B2).

Step 3. Connect 2*DP cables between the KVM (OUT A, OUT B) and your 2 monitors.

Step 4. Insert your USB devices(keyboard mouse and U disk) into the USB port on the KVM.

Step 5. Insert the Wired Remote into the "SELECT" port to remotely switch between PC1 and PC2.

Packing list:

1 * Displayport KVM switch; 2 * 8K DP1.4 cable; 2 * USB3.0 cable; 1 * Wired remote; 1 * USB power cable; 1 * User manual.

The windows system can expand 2 different screens, while the MAC OS can only expand 2 identical screens.

Please be Aware before Order:

• This Dual Monitor KVM Switch DisplayPort requires 2* DP+1*USB input for each computer and 2* DP output for 2 monitors. However, most computers especially laptops do not have 2 DisplayPort outputs,If so, please check if your computer / laptop has another video ports like HDMI or USB C (VGA and DVI is not recommended), If yes, you can use a powered HDMI to DP adapter (HDMI input, displayport output, with USB power), or a USB C to DP adapter for converting it to DisplayPort.
• When adapters are being used, the resolution will drop. So the less adapter the better.
• This Dual Monitor Displayport KVM Switch does not support EDID emulation (all DP KVM on the market do not support it, this is the DisplayPort specific issue and is why DisplayPort doesn't support EDID emulation, not just this product). So,after switching, the window position of the original display information will be shifted to some extent.
• If need to achieve 8K@30Hz, 4K@144Hz, 4K@120Hz, in addition to the computers and monitors to support this resolution, also need to use a real 8K DP1.4 cables, the 2 cables we provide are 8K DP cables.Recommended tested and compatible DP1.4 cable ASIN: B0CBWLQ79P
• Most reasons for only one video output are due to incorrect connections. Please ensure that each computer has (2 DP cables + 1 USB cable) connected to the KVM.