2 Computers 2 Monitors KVM Switch HDMI 8K@60Hz+Displayport 8K@30Hz USB3.0

This 8K DP HDMI KVM switch connects 2 computers or laptops to 2 monitors

• There are two switching methods, you can choose any one, which is convenient and quick!
• With digital display, ensuring you're always aware of the system you're interacting with.
• 2 port HDMI+DP 8K KVM supports up to 8K@60Hz(HDMI 8K@60Hz+Displayport 8K@30Hz), backward compatible, RGB 4:4:4.
• Plug and play, no need to install any software driver
• Compatible with various systems: Windows, Mac, Unix, Linux, etc.
• With USB3.0 HUB for sharing USB devices. The transfer rate up to 5GBPS, it is 10 times faster than USB2.0.
• Support extended ? duplicated ?spliced display depending on computer setting.

2 in 2 out 8K HDMI+DP KVM switch With Digital Display and Wired Remote

This 2 port Dual Displayport HDMI KVM Switch allows 2 computers or laptops to connect to 2 displays, and 2 computers can share USB peripherals. You can switch between the two computers by pressing button on the KVM panel or with the wired remote. It's the ideal accessory for your home, office, or other workspace, allowing you to share a set of wired or wireless keyboards, mice, and DP monitors between two systems, saving desk space.

Tip: Wired Remote cable is equipped with 1.8m as standard, and there are 3, 5,10,15 meters for options.

8K High Resolution KVM Switch

Compatiable with high resoluton HDMI up to 8K@60Hz, DP up to 8K@30Hz backward compatible,

such as 5120x2880@50/60Hz, 3840x2160@60/120/144Hz, 3840x1620@60/120/144Hz, 3440x1600@60/120/144Hz, 3440x1440@60/120/144Hz, 3840x1080@60/120/144/165/240Hz, 3200x1800@60/120/144/165/240Hz, 2560x1440@60/120/144/165/240Hz, 2048x1536@60/120/144/165/240Hz, 2048x1280@60/120/144/165/240Hz, 2048x1080@60/120/144/165/240Hz, 1920x1200@60/120/144/165/240Hz, 1920x1080@60/120/144/165/240Hz, etc.

How to set up?

1. Turn off all your devices and unplug all cables;

2. Plug one end of the power supply USB cable into the KVM, and connect the other end to a USB port on your computer.

3. Plug USB 3.0 cables and HDMI2.1 cables, DP1.4 magic ring cables into the KVM switch and your computers;

4. Plug HDMI2.1 cables , DP1.4 magic ring cables into the KVM switch and your monitors;

5. Plug the mouse into the mouse slot of the KVM switch, plug the keyboard into the keyboard slot of the KVM switch, plug the wired remote push button switch into the KVM switch, plug the printer/USB driver/other USB device into the Hub port of the KVM switch if needed;

6. Turn on the KVM switch;

7. Turn on your devices one by one.

TIPs:

1. If your computer has a password setting, do not turn on both computers at the same time. After turning on the first computer into the system, switch to another computer and them turn it on.

2. Pls use the HDMI2.1 cables , DP1.4 magic ring cables that came with our KVM to connect the KVM bettween monitors.