Specification Input Voltage: 6 - 27V Maximum Current: 43A Input Level: 3.3V - 5V Control Mode: PWM or Level Methond 1: VCC is connected to 5v power supply of Mcu,GND is connected to GND of MCU R_EN and l_When en is short circuited and connected to 5V level, the driver can work L_PWM,input PWM signal or high level motor for ward R_PWM,input PWM signal or high level motor reverse Methond 2: VCC is connected to 5V power supply of MCU,GND is connected to GND of MCU R_EN AND L_EN short circuit and input PWM signal for speed regulation L_PWM,pin input 5V level,motor forward R_PWM,pin input 5V level,motor reversal Features: - The drive adopts a full H bridge drive module composed of high power drive chip BTS7960, with overheating and overcurrent protection function. - The dual BTS7960 H bridge drive circuit has powerful driving and braking effects, effectively isolating the microcontroller and motor driver. - Dual BTS7960 high current (43A) drive. - 5V isolated with the microcontroller, effectively protecting the microcontroller. - It can realize forward and reverse rotation of the motor, two PWM inputs, and the maximum frequency is 25KHZ. - Two channels of overcurrent and overheat error signal output. - Isolate the 5V power supply of the chip (it can share 5V with the microcontroller). Package Include: 1 x Motor Drive Board Module

It can realize forward and reverse rotation of the motor, two PWM inputs, and the maximum frequency is 25KHZ. The drive adopts a full H bridge drive module composed of high power drive chip BTS7960, with overheating and overcurrent protection function. 5V isolated with the microcontroller, effectively protecting the microcontroller. The double BTS7960 H bridge drive circuit has powerful driving and braking effects, effectively isolating the microcontroller and motor driver. Isolated chip 5V power supply (can be shared with the MCU 5V), can also use the on-board 5V supply; the supply voltage 5.5V to 27V.