The Arty S7 board features new Xilinx Spartan-7 FPGA and is the latest member of the Arty family for Makers and Hobbyists. The Spartan-7 FPGA offers the most size, performance, and cost-conscious design engineered with the latest technologies from Xilinx. Putting this FPGA in the Arty form factor provides users with a wide variety of I/O and expansion options. Use the dual row Arduino connectors to mount one of the hundreds of hardware compatible shields available, or use the Pmod ports with Digilent's pre-made Pmod IP blocks for a more streamlined design experience. Arty S7 was designed to be MicroBlaze ready and comes out of the box ready to use with Xilinx's WebPACK licensing. Features: * Arty S7-25 * * FPGA part: XC7S25-CSGA324 * 1 MSPS On-chip ADC: Yes * Logic Cells: 23,360 * Slices: 3,650 * Flip-flops: 29,200 * Block RAM (Kbits): 1,620 * Clock Management Tiles: 3 * DSP Slices: 80 * Arty S7-50 * * FPGA Part: XC7S50-CSGA324 * 1 MSPS On-chip ADC: Yes * Logic Cells: 52,160 * Slices: 8,150 * Flip-flops: 65,200 * Block RAM (Kbits): 2,700 * Clock Management Tiles: 5 * DSP Slices: 120 * Internal clock speeds exceeding 450MHz; * On-chip XADC * Programmable over JTAG and Quad-SPI Flash * System Features: * * 256 MB DDR3L with a 16-bit bus @ 650 MHz * 128 Mbits Quad-SPI Flash * 100 MHz External Clock * USB-JTAG Programming circuitry * (USB Micro cable required, NOT INCLUDED). * Powered from USB or a 7V-15V source * System Connectivity: * * USB-UART Bridge * Interaction and Sensory Devices * * 4 Switches, 4 Buttons * 1 Board Reset Button, 1 FPGA Reset Button * 4 Green LEDs, 2 RGB LEDs * Expansion Connectors * * 4 Pmod connectors * Arduino/chipKIT Shield connector See more

Powered from USB or any 7V-15V source. Programmable over JTAG and Quad-SPI Flash. On-chip analog-to-digital converter (XADC). Internal clock speeds exceeding 450MHz. Arty S7 comes in two FPGA variants: Arty S7-25 features Xilinx XC7S25-CSGA324. Arty S7-50 features the larger Xilinx XC7S50-CSGA324.