dbx 286s Microphone Preamp & Channel Strip Processor Mono 4-way

BE SAFE

WE ONLY SOURCE

FROM OFFICIAL SUPPLIERS

From United States

To International

In 5-10 Days

US$19.99 Shipping Fees for any Order

GRAND SELECTION

Think of it and most probably we have it among our grand selection of products!

AMAZING PRICES

Get ready for the amazing and best Supps prices ever!

FIXED RATE DELIVERY

Get your order anywhere on this planet within 5-10 days with a fixed rate of $19.99 (no matter the size of your order)

+1 (844)-467 8777

PHONE:

+1 (844)-467 8777

dbx 286s Microphone Preamp & Channel Strip Processor Mono 4-way

Regular Price: US$377.99

Special Price US$314.99

Availability: In stock

Supplier: dbx

Category: Musical Instruments Microphones & Accessories Preamps

Qty:

dbx 286s

Microphone Preamplifier/Channel Strip Processor

The dbx 286s is a full-featured Channel Strip Processor that delivers a studio-quality microphone/instrument preamplifier and four processors that can be used independently or in any combination. The sonically pristine dbx 286s Mic Preamp has all the features you need, including wide-ranging input gain control, switchable +48V phantom power, and an 80Hz high-pass filter to remove low frequency hum, rumble or wind. Use the patented dbx OverEasy compressor to transparently smooth out uneven acoustic tracks or deliver that classic “in your face” vocal performance that only a dbx compressor can. Fine-tune the Enhancer HF Detail control to add sparkle and crispness to your tracks and make adjustments to the LF Detail control to add fullness and depth to vocals and bass instruments while cleaning up the muddy low mid-range frequencies. Plus, the separate threshold and ratio controls on the Expander/Gate allow you to subtly reduce headphone leakage or radically gate noisy guitar amps.

Studio quality Mic Preamp/Channel Strip Processor
Program-adaptive Expander/Gate
Frequency tunable De-Esser reduces sibilance and high frequency distortion
Enhancer increases the detail and definition of the high and low frequencies
Full compliment of meters and status LEDs
Insert jack allows you to add an external processor
Precision detented controls

Who uses this product?


	dbx 286s Stereo 2-Way, Mono 4-Way Crossover with Mic XLR connectors	dbx 676 Tube Microphone Preamp Channel Strip	dbx 580 Compact, Professional Mic Preamp
Mic Input	Floating balanced, Pin 2 Hot	Female XLR (Pin 2 Hot)	Electronically balanced/unbalanced, RF filtered
Impedance	~ 4.2kO Balanced	1.9 kO	1.7 kO
CMRR	>40dB, typically 55dB	>85 dB from 20 Hz to 3 kHz, >70 dB from 3 kHz to 20 kHz	>60 dB; typically >70 dB from 20 Hz – 20 kHz
Power Requirements	15 Watts	20 Watts	2.56 Watts
Instrument Input	Floating balanced, Tip Hot	Tip-Sleeve ¼” Jack (Front Panel)	Tip-Sleeve ¼” Jack (Front Panel)
Output Type	4” TRS phone (Balanced/Unbalanced)	Male XLR and Tip-Ring-Sleeve ¼” (Pin 2 and Tip hot)	Electronically balanced/unbalanced, RF filtered
Low Detail	Bell-shaped boost @ 80Hz, bell-shaped cut @250Hz, ratio is approximately 2:1	100 Hz, Low-pass shelving filter	0 to +15 dB boost, simultaneous bell filter boost (125 Hz center frequency) and bell filter cut (400 Hz center frequency)
High Detail	Program-controlled shelving equalizer, approximately 15dB maximum HF boost	10 kHz, High-pass shelving filter	0 to +15 dB boost, high-shelving filter (10 kHz corner frequency)
Dimensions (H x W x D)	1.75” x 5.75” x 19”	3.5" x 19" x 8"	5.25” x 1.5” x 6”
Weight	4.5 lbs	8.1 lbs	1.3 lbs

dbx 286s Microphone Preamp & Channel Strip Processor FROM THE MANUFACTURER The cost and hassle of patching together multiple processors for use on one track can be frustrating. The dbx 286s provides you with all the mic processing you need in one box, with the shortest, cleanest signal path to keep your music sounding its best! The floating balanced XLR mic input Accepts balanced or unbalanced inputs to easily connect to professional and home studio microphones. The additional 1/4" TRS line input can accept balanced/unbalanced signals to process live electronic instruments or pre-recorded tracks at mix down. Use the insert jack to interface between the mic preamp and the signal processing sections to "Loop out" to external processors (such as EQ or delay unit) or to mix the mic preamp's signal out to an external destination.

Purchase includes: dbx286s, power cord, operation manual, and rack mount screws and washers (x4). Operating voltage: 120VAC 60Hz, 100VAC 50/60Hz. Input: 1/4" TRS (x2) and XLR (x1); output: 1/4" TRS (x1). Program adaptive expander/Gate. Frequency response: 20Hz to 20kHz. Enhancer increases the detail and definition of the high and low frequencies. Frequency tuneable de-esser reduces sibilance and high frequency distortion. Classic dbx compression puts great sound within easy reach. Studio quality mic preamp/channel strip processor.