Ctrshif 2-Pack Bore Gun Rifle Cleaner Shotgun Gun Cleaning Kit for 9mm 5.56mm .223 .22 .308 12Ga and Others

Ctrshif bore Gun Cleaner combined all the advantages.

Clean in One Quick Pass: One pass loosens carbon fouling, large particles, scrubs out the remaining residue with a bronze brush, and then swabs it all spotless with a cleaning area 160x larger than a standard patch.

Washable Reusable and Packable: Very compact and lightweight. The bore gun cleaner can be washed easily by hands or use a laundry bag for machine wash.

Design Principle: The material resembles that of a wool sock and has brass bristles embedded into the fabric to clean the muzzle of your bore. The brass weight is weighted which allows is to be inserted easily into the barrel without getting stuck.

A Gun Cleaning Snake for Any Firearm

No matter the firearm, there is a Climore Gun Cleaner Snake that will clean it. Find your size with multiple options of Gun Snakes to choose from.

The Original, Fastest Bore Cleaner

Cut out the hassle of rods and patches with the Climore Bore Gun Cleaner. Easily clean your firearm with the Gun Snake by dropping the weighted end into your barrel and pulling the Gun-Snake through, leaving your barrel clean and smooth.

How to Use:

Step 1: Take your favorite gun cleaning solvent and spray it on the bronze bristles.

Step 2: Take the end of the Bore Gun Cleaner with the brass weight and drop it down the barrel and guide it through until the bronze bristles and solvent make contact.

Step 3: Once you make contact with the brush section of the Bore Gun Cleaner you’ll see that it starts giving you resistance.

Step 4: Pull the Gun Cleaner Snake with as much or as little force is necessary. If you’re Bore Gun is the same size caliber as the barrel then you may need to tug pretty hard to get it though.

Step 5: The main floss area behind the bronze brush comes out very easily and aids in removing the carbon that was just scraped off from the brush and solvent.