Overview This is an E-Ink display HAT for Raspberry Pi, 2.7inch, 264x176 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. Features No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano Onboard 4x Keys SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32) Specifications Operating voltage: 3.3V/5V Interface: 3-wire SPI, 4-wire SPI Outline dimension: 85mm × 56mm Display size: 57.288mm × 38.192mm Dot pitch: 0.217 × 0.217 Resolution: 264 × 176 Display color: black, white Grey scale: 4 Full refresh time: 6s Refresh power: 24mW(typ.) Standby power: <0.017mW Viewing angle: >170° Package include 1. 2.7inch e-Paper HAT x1 2. RPi screws pack (2pcs) x2 3. PH2.0 20cm 8Pin x1

Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Ardui/STM32), feel free to contact us if you have any thing need our help. The e ink monitor with onboard voltage translator, compatible with 3.3V/5V MCUs. Waveshare 2.7'' epaper screen comes with SPI interface, for connecting with other controller boards like Raspberry/Ardui/Nucleo, etc. This e-ink display monitor has standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. The 2.7 Inch e-paper display module has no backlight, keeps displaying last content for a long time even when power down.