Overview This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. 2.13inch e-Paper HAT (B) Features No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing Standard RPi 40PIN GPIO extension header, fits Raspberry Pi series boards, Jetson Nano SPI interface, for connecting with other controller boards like Ardui/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Ardui/STM32) 2.13inch e-Paper HAT (B) Specifications Operating voltage: 3.3V/5V Interface: 3-wire SPI, 4-wire SPI Outline dimension: 65mm × 30.2mm Display size: 23.71mm × 48.55mm Dot pitch: 0.229 × 0.228 Resolution: 250 × 122 Display color: red, black, white Grey level: 2 Full refresh time: 15s Refresh power: 26.4mW(typ.) Standby power: <0.017mW Viewing angle: >170° Package include 1. 2.13inch e-Paper HAT (B) x1 2. RPi screws pack (2pcs) x1 3. PH2.0 20cm 8Pin x1

Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Ardui/STM32), feel free to contact us if you need technical support. The waveshare epaper display with onboard voltage translator, compatible with 3.3V/5V MCUs. The 2.13 inch e-paper with SPI interface, for connecting with other controller boards like Ardui/Nucleo, etc. The 2.13inch E-ink Display HAT for Raspberry Pi has no backlight, keeps displaying last content for a long time even when power down. Waveshare 2.13inch e-paper HAT with standard RPi 40PIN GPIO extension header, fits Raspberry Pi series boards, Jetson Nano.