Description: Module Model: MCY-12-1 Input voltage: 6V-12V Input Current: 0.5A-1A High voltage type: DC type pulse Output voltage: About 500KV (Please pay attention to safety when used) High voltage bipolar discharge distance: 2cm -5 cm Precautions for use: To avoid the use of electricity at high voltage load, must adjust the proper distance (between the front end of the high-voltage power).To test the arc distance from short to long experiment, when power is strictly prohibited exceed the maximum arcing distance, energy can not be released due to high pressure, easy to damage the module. Power module, the internal should not heat, so we can not work long hours.Determine whether the battery capacity can drive maximum power output of the battery voltage measurement approach is arcing time. If 6V or so you can output the maximum power. Two small-capacity lithium series is 7.2V, measured in arc-state voltage has dropped to about 4V, the capacity of the smaller voltage pull lower. It is proposed to use lithium 2000MA above, the best conditions with more battery 4000MA. Note: Light shooting and different displays may causethe color of the item in the picture a little different from the real thing.The measurement allowed error is+/-1-3cm.We highly appreciate all custome rsopinions to improvethe selling, also if anything you unsatisfied, please contact us for probable best solution. Thank you! Package Included: 1Pcs DC 6V-12V to 500KV High Voltage Generator Inverter Boost Power Module(If the number of products received is incorrect, please contact us. we will refund or give you a replacement.)

We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution. Package Included:1Pcs DC 6V-12V to 500KV High Voltage Generator Inverter Boost Power Module(If the number of products received is incorrect, please contact us . we will refund or give you a replacement). The output high voltage pulse current, small size, high efficiency.Peripheral circuit is simple (just plug in switches, batteries can be) the discharge intensity violent. After the input terminal DC6V-12V voltage can get tens of thousands of volts of direct current high voltage at the output,It can be used for high school science experiment, electronic equipment, negative ion generator, high voltage source when using scientific small production. This module is a science of small production with high voltage inverter transformer / booster finished module, uses the Tesla coil principle is made.(Thin red wire: power supply positive pole input terminal.Thin green wire: power supply negative pole input terminal.Thick red wire: output terminal.).