LED Indicator status:

it is always on when it is powered on,

and flashes when reading and writing.

• Matrix heat dissipation holes expand heat dissipation area

• Increase heat dissipation and improve hard drive stability

When the equipped mobile screw is not needed, it can be locked on the board for easy use and retrieval, making it convenient and not easy to lose.

Step 1:

Tear off the film of the (b thermal pad) and stick it into the bottom groove of the

(a lower heat dissipation component);

Step 2:

Place (c solid-state drive) into the card slot , expose the chip contact surface;

Step 3:

secure the tail screws;

Step 4:

Tear off the (d) thermal conductive pad film and stick it onto the (c) solid-state drive;

Step 5:

Align the heat sink with the card slot and press to secure it;

Step 6:

Connect to the host, insert the motherboard slot, and secure the tail screws;

Installation successful.

1 x M.2 NVME SSD to PCIe X4 Adapter Card

1 x Chassis Screw

1 x Full height PCIe Bracket

2 x Screws for PCIe Bracket 1 x Bolts

1x Screwdriver

1 x Aluminum Heatsink

1x

1x Bolt

2 x Themall conductive adhesive

1x Screwdriver

1x housing