CKL 2 Port DisplayPort1.4 MST KVM Switch Quad Monitor 4K@60Hz (2 DP in, 4 DP out for 2 Computers)

Key Features:

1. Control 2 computers with one independent set of wireless or wired keyboard and mouse;
2. Two DP input to 4 DP outputs (MST Technology) for each computer
3. Quad monitor outputs for extended or mirrored display, each output supports resolution up to 4K@60Hz;
4. 4 switching modes: keyboard hotkey, mouse hotkey, wired remote and push button;
5. With an integrated USB 3.0 HUB port for high speed data transfer and peripheral sharing;
6. Supports separate audio and microphone outputs;
7. Cross support multip platforms, plug and play without software needed;
8. Include power adpater and cables needed for set-up.

Build a Clean and Tidy Work Space for Your Personal Computer and Work Laptop

Build a Clean and Tidy Work Space for Your Personal Computer and Work Laptop

Front and Back View

MST (Multi-Stream-Transport) allows users to adopt 2 DisplayPort 1.2 or 1.4 video source to Multiple Monitors, providing an extended desktop mode and mirrored mode for multitasking across four displays while reducing bulky cable connections and adpaters.

How to install:

1. Power off everything before installation
2. Connect PC 1 to PC 1 IN using the included DP 1.4 cables and USB 3.0 cable
3. Connect PC 2 to PC 2 IN using the included DP 1.4 cables and USB 3.0 cable
4. Connect Monitor A, Monitor B,Monitor C, Monitor D to DP Out A ,B,C,D using DP 1.4 cables
5. Connect keyboard to USB keyboard port, mouse to the USB mouse port. If you are using wireless set of keyboard and mouse that shares one unified dongle, plug it into the USB keyboard port (with hotkey), or plug it into the USB 3.0 HUB port (without hotkey)
6. Connnect the power adapter and other periperrals as shown in above
7. Power on the KVM switch, then monitors, then computers.

Note:

1. Some keyboards and mice with special features may not work well with the hotkey, if that is the case, please turn off the hotkey then the USB keyboard and mouse ports will turn into USB 2.0 HUB ports. Without hotkey, you can either use the push button or the wired remote to switch between computers
2. For laptops with only USB C output, please use USB C to DisplayPort adapter.