BTECH UV-50X2 (Second Gen.) Mobile 50 Watt Dual Band Base Mobile Radio: VHF UHF Amateur (Ham)

BE SAFE

WE ONLY SHIP

FROM OFFICIAL SUPPLIERS

From United States

To International

In 5-10 Days

US$19.99 Shipping Fees for any Order

GRAND SELECTION

Think of it and most probably we have it among our grand selection of products!

AMAZING PRICES

Get ready for the amazing and best Supps prices ever!

FIXED RATE DELIVERY

Get your order anywhere on this planet within 5-10 days with a fixed rate of $19.99 (no matter the size of your order)

+1 (844)-467 8777

PHONE:

+1 (844)-467 8777

BTECH UV-50X2 (Second Gen.) Mobile 50 Watt Dual Band Base Mobile Radio: VHF UHF Amateur (Ham)

Regular Price: US$407.99

Special Price US$339.99

Availability: In stock

Supplier: BTECH

Category: Electronics Communications Communication Radios Two-Way Radios

Qty:

BE SAFE

WE ONLY SHIP

FROM OFFICIAL SUPPLIERS

From United States

To International

In 5-10 Days

US$19.99 Shipping Fees for any Order

GRAND SELECTION

Think of it and most probably we have it among our grand selection of products!

AMAZING PRICES

Get ready for the amazing and best Supps prices ever!

FIXED RATE DELIVERY

Get your order anywhere on this planet within 5-10 days with a fixed rate of $19.99 (no matter the size of your order)

+1 (844)-467 8777

PHONE:

+1 (844)-467 8777

UV-50X2 (Second Generation) 50W Mobile Two Way Radio

Second Generation

The UV-50X2 is very much the same radio, our users have come to enjoy, with several new functionality improvements. The UV-50X2 has seen several performance improvements and tweaks in its second generation release.

RJ45 Audio Input & Output

The UV-50X2 has new menus and operations that allow audio I/O from its RJ45 microphone port. This allows the UV-50X2 to be installed for custom applications, where users want more control on where the speaker and mic audio is routed to.

VOX Handsfree Support

The UV-50X2 (Second Generation) includes VOX support. VOX allows for handsfree use with your favorite audio accessories or the included handheld microphone.

In the Box:

UV-50X2 Mobile Radio
DTMF Handheld Microphone
6.5' Direct Connect 12V Leads
Vehicle Mounting Bracket
Screws & Mounting Hardware
Easy-to-read Manual (written in the US)
RJ-45 to Kenwood K1 Accessory Adaptor

BTECH Radios are not like other similar looking radios. BTECH radios are designed in the USA with custom firmware and internal hardware differences. BTECH radios are backed with a full US support. A BTECH label means you are getting the best radio available! A few of our highlighted differences are below:

BTECH radios use an upgraded Power Chipset
Customizable PTT Return Times: When handling multiple conversations, the radio allows users to customize if the radio automatically switches to respond to active channels, or allow the user to set one channel default to transmit on.
Dual Synchronize Display Mode: Synchronize Up to 2 Channels - and display both their channel name and channel frequency!
Microphone Audio Gain Settings: Sound great and customize your microphone output for any repeater
Expanded Frequency Range Support
Auto Power Off Function: Save your battery and prevent unnecessary power draining
Channel Mode Editing Settings: Edit saved memory channels on-the-fly; our radio does not require you to delete a channel to make changes
New Scanning Modes: Auto Scan (Scan with a power reboot), Scanning Resume, and Variable Frequency Scanning
Quad Watch Delay Time: Allows the receiver to stay on the secondary channel longer after incoming transmission - customize the delay up to 50 seconds; This avoids manually channel switching when you are engaged with simultaneous contacts on two frequencies
Randomization Privacy Mode


RJ45 to K1 Audio Adaptor The UV-50X2 includes a RJ45 to K1 Audio Adaptor. K1 Audio accessories are used on our BTECH handheld radios, and now you can use those same accessories with your mobile radios! The radio includes special menus to allow audio to be routed both through the UV-50X2 and K1 accessory, only through the radio, or only through the K1 audio accessory.	Uniquely customize your UV-50X2 The X-Series Mobiles use our Multi-Color LCD display screen. You can adjust the complete display colors to be exactly as you want it. Beyond the display, you can fully customize your channels to display their alpha-numeric names or frequency settings. There are 200 programmable memory channels. You can add or remove channels from scanning list. You can easily program from a PC or right on the radio itself. Pair the UV-50X2 with the Nagoya UT-72 Magnetic Mount Antenna for easy installation with the UHF antenna connectors.	Group Tones supported The UV-50X2 supports the most common Analog Tones. It supports CTCSS, DCS, 2Tone, 5Tone, and DTMF calling methods. Set-up your calling methods to call by group tones. Tone calling (private line) is required by most repeater applications and the UV-50X2 supports the latest standards. The UV-50X2 can even send DTMF tones. This allows for sending ANI (Caller ID) or remote commands that require DTMF tones; or it can receive incoming DTMF tones to allow for remote stun or kill commands	Quad Watch and Display Sync The UV-50X2 operates as multiple radios in one, with either VHF or UHF as the 'Main' band, while simultaneously watching up to 3 other frequencies or channels; and, if you like, you can configure your UV-50X2 for simultaneous VHF-VHF or UHF-UHF operation, too! Additionally, as a new feature added: you can monitor both VFO (frequency) and channel modes simultaneously. Dual Sync DIsplay: With Dual Sync Display, you can synchronize channel lines to one or two channels. This allows you to sync display 'lines' to a single channel allowing the user to have both frequency and channel name data displayed simultaneously.

Technical Specifications

Bands Supported	VHF & UHF Dual Band Radio
Memory Channel	200 Channels
Output power	50W/5W
Tone Support	CTCSS, DCS, 5TONE, 2TONE, DTMF
Accessory Jack	Mono Speaker Output In Rear, RJ45 Audio Output in Front, K1 Accessories support with included Adaptor

Additional Features	Display Sync, Nuisance Channel Scan Skip, SOS Alarm, NOAA Weather Channels, Transmit Time-Out, Busy Channel Lockout, DTMF Keypad, Adjustable Scanning Modes, Quad Watch, Adjustable Squelch
Size	5.7 (w) x 1.85 (h) x 7.5 (d) in
Weight	2.65lb
Antenna Jack	UHF (SO239 Connector)

UV-50X2: SECOND GEN.

BTECH: We are proud to be here in the USA

BTECH radios are designed and supported right here in the USA. A BTECH label means you are getting a radio with real US based support, and development! If you ever have an issue, our team will be prompt, knowledgeable, and supportive to ensure your radio operates exactly as it should.

BTECH UV-50X2 VHF/UHF Dual Band Radio

Second Generation

Common Questions and Answers:

Q: What is the product support?
A: If you have any issues or concerns, reach out to our support team, who will be happy to assist with any setup issues. The UV-50X2 includes support against any manufacturing defects for a full year.
Q: Is it compatible with other analog radios.
A: It will support 99% of analog systems. The UV-50X2 supports all CTCSS, DCS, 5TONE, 2TONE, and DTMF call tones used by a majority of analog radio systems.
Q: What is the maximum range?
A: Range varies on topography: Repeater Use: Up to 100 miles | Hill to Valley: 36 miles | Open Flat Terrain: 3-5 miles | Urban/Outside Buildings: ~1 mile

Kit Includes: BTECH UV-50X2, RJ45 to K1 Audio Adaptor, Speaker Mic, DC Cable, Radio & Mic Brackets, Mounting Hardware, and User Guide. The UV-50X2 operates as multiple radios in one, with either 144 MHz or 430 MHz as the "Main" TX/RX band, while simultaneously watching up to 3 other frequencies or channels; and, if you like, you can configure your UV-50X2 for simultaneous VHF-VHF or UHF-UHF operation, too!. Recommended Accessories: Pair UV-50X2 with the Nagoya UT-72 Magnetic Mount Antenna for easy installation. The PC04 FTDI Cable is recommended for easy computer programming. The UV-50X2 includes all of the necessary mounting hardware to easily wire into any vehicle. You can use the UV-50X2 as a base station at home or in the office with the optional RPS-30M power supply (not included). The UV-50X2 has been upgraded with Audio I/O support through the RJ45 Microphone Port. Included is also a K1 Audio adaptor. The K1 accessory jack is the most common radio accessory jack in the market. This means the UV-50X2 has the widest support of aftermarket audio accessories allowing you to find the best accessories for however you use your radio.