BTECH UV-25X4 (Second Gen.) Mini Mobile 25 Watt Tri Band Base Mobile Radio: VHF 1.255M UHF Amateur (Ham)

BE SAFE

WE ONLY SOURCE

FROM OFFICIAL SUPPLIERS

From United States

To International

In 5-10 Days

US$19.99 Shipping Fees for any Order

GRAND SELECTION

Think of it and most probably we have it among our grand selection of products!

AMAZING PRICES

Get ready for the amazing and best Supps prices ever!

FIXED RATE DELIVERY

Get your order anywhere on this planet within 5-10 days with a fixed rate of $19.99 (no matter the size of your order)

+1 (844)-467 8777

PHONE:

+1 (844)-467 8777

BTECH UV-25X4 (Second Gen.) Mini Mobile 25 Watt Tri Band Base Mobile Radio: VHF 1.255M UHF Amateur (Ham)

Regular Price: US$239.99

Special Price US$199.99

Availability: In stock

Supplier: BTECH

Category: Electronics Portable Audio & Video CB & Two-Way Radios Two-Way Radios

Qty:

UV-25X4 (Second Generation) 25W Mobile Two Way Radio

Second Generation

The UV-25X4 is very much the same radio, our users have come to enjoy, with several new functionality improvements. The UV-25X4 has seen several performance improvements and tweaks in its second generation release.

RJ45 Audio Input & Output

The UV-25X4 has new menus and operations that allow audio I/O from its RJ45 microphone port. This allows the UV-25X4 to be installed for custom applications, where users want more control on where the speaker and mic audio is routed to.

VOX Handsfree Support

The UV-25X4 (Second Generation) includes VOX support. VOX allows for handsfree use with your favorite audio accessories or the included handheld microphone.

In the Box:

UV-25X4 Mobile Radio
DTMF Handheld Microphone
Vehicle Cigarette Connector Power Cable (4.5')
Vehicle Mounting Bracket
Screws & Mounting Hardware
Easy-to-read Manual (written in the US)
RJ-45 to Kenwood K1 Accessory Adaptor

BTECH Radios are not like other similar looking radios. BTECH radios are designed in the USA with custom firmware and internal hardware differences. BTECH radios are backed with a full US support. A BTECH label means you are getting the best radio available! A few of our highlighted differences are below:

BTECH radios use an upgraded Power Chipset
Customizable PTT Return Times: When handling multiple conversations, the radio allows users to customize if the radio automatically switches to respond to active channels, or allow the user to set one channel default to transmit on.
Dual Synchronize Display Mode: Synchronize Up to 2 Channels - and display both their channel name and channel frequency!
Microphone Audio Gain Settings: Sound great and customize your microphone output for any repeater
Expanded Frequency Range Support
Auto Power Off Function: Save your battery and prevent unnecessary power draining
Channel Mode Editing Settings: Edit saved memory channels on-the-fly; our radio does not require you to delete a channel to make changes
New Scanning Modes: Auto Scan (Scan with a power reboot), Scanning Resume, and Variable Frequency Scanning
Quad Watch Delay Time: Allows the receiver to stay on the secondary channel longer after incoming transmission - customize the delay up to 50 seconds; This avoids manually channel switching when you are engaged with simultaneous contacts on two frequencies
Randomization Privacy Mode


RJ45 to K1 Audio Adaptor The UV-25X4 also includes a RJ45 to K1 Audio Adaptor, allowing you to use K1 audio accessories from our BTECH handheld radios with your mobile radio! The radio includes special menus to allow audio to be routed both through the UV-25X4 and K1 accessory, only through the radio, or only through the K1 audio accessory.	Uniquely customize your UV-25X4 The X-Series Mobiles use our Multi-Color LCD display screen. You can adjust the complete display colors to be exactly as you want it. Beyond the display, you can fully customize your channels to display their alpha-numeric names or frequency settings. There are 128 programmable memory channels. You can add or remove channels from scanning list. You can easily program from a PC or right on the radio itself. Pair the UV-25X4 with the Nagoya TB-320A Antenna and RB-50 Magnetic Mount for easy installation with the UHF antenna connectors.	Group Tones supported The UV-25X4 supports the most common Analog Tones. It supports CTCSS, DCS, 2Tone, 5Tone, and DTMF calling methods. Set-up your calling methods to call by group tones. Tone calling (private line) is required by most repeater applications and the UV-25X4 supports the latest standards. The UV-25X4 can even send DTMF tones. This allows for sending ANI (Caller ID) or remote commands that require DTMF tones; or it can receive incoming DTMF tones to allow for remote stun or kill commands	Quad Watch and Display Sync The UV-25X4 operates as multiple radios in one, with either VHF or UHF as the 'Main' band, while simultaneously watching up to 3 other frequencies or channels; and, if you like, you can configure your UV-25X4 for simultaneous VHF-VHF or UHF-UHF operation, too! Dual Sync Display: With Dual Sync Display, you can synchronize channel lines to one or two channels. This allows you to sync display 'lines' to a single channel allowing the user to have both frequency and channel name data displayed simultaneously.

Technical Specifications

Bands Supported	VHF, 220MHz, & UHF Tri Band Radio
Memory Channel	200 Channels
Output power	VHF: 25W (Peak), 20W (AVG) / Low: 10W; 1.25M: 20W (Peak) 15W (AVG) / Low: 7W; UHF: 20W (Peak) 15W (AVG) / Low: 7W
Tone Support	CTCSS, DCS, 5TONE, 2TONE, DTMF
Accessory Jack	TRRS Speaker Output In Rear, RJ45 Audio Output in Front, K1 Accessories support with included Adaptor

Additional Features	Display Sync, Nuisance Channel Scan Skip, SOS Alarm, NOAA Weather Channels, Transmit Time-Out, Busy Channel Lockout, DTMF Keypad, Adjustable Scanning Modes, Quad Watch, Adjustable Squelch
Size	3.85 (w) x 1.83 (h) x 4.65 (d) in
Weight	.9lb
Antenna Jack	UHF (SO239 Connector)
Frequency Range	FM: 87.5-108 MHz; VHF: 136-174 MHz; 1.25M: 220-225 MHz; UHF: 400-520 MHz

UV-25X4: SECOND GEN.

BTECH: We are proud to be here in the USA

BTECH radios are designed and supported right here in the USA. A BTECH label means you are getting a radio with real US based support, and development! If you ever have an issue, our team will be prompt, knowledgeable, and supportive to ensure your radio operates exactly as it should.

BTECH UV-25X4 VHF/1.25M/UHF Tri Band Radio

Second Generation

Q: What is the product support?
A: If you have any issues or concerns, reach out to our support team, who will be happy to assist with any setup issues. The UV-25X4 includes support against any manufacturing defects for a full year.
Q: Is it compatible with other analog radios.
A: It will support 99% of analog systems. The UV-25X4 supports all CTCSS, DCS, 5TONE, 2TONE, and DTMF call tones used by a majority of analog radio systems.
Q: What is the maximum range?
A: Range varies on topography: Repeater Use: Up to 100 miles | Hill to Valley: 36 miles | Open Flat Terrain: 3-5 miles | Urban/Outside Buildings: ~1 mile

Dual Watch monitoring VHF/UHF and 220Mhz: The 220 MHz band antenna lowpass filter is switched with a relay and the 2 meter lowpass filter and 70 cm highpass filters are switched with PIN diodes - resulting in a audible relay switch noise when monitoring 220MHz with VHF/UHF simultaneously. A relay that completely isolated the 220 MHz RF filter won't impact the RF performance of the 2 meter/70 cm bands. If monitoring multiple 220MHz or VHF/UHF simultaneously the relay is not heard or used. All-Inclusive Kit: Your purchase includes the BTECH UV-25X4, RJ45 to K1 Audio Adapter, Speaker Mic, DC Cable, Radio & Mic Brackets, Mounting Hardware, and a User Guide to help you get started with your advanced radio experience. Triple-Band Functionality: Operate the UV-25X4 as multiple radios in one, using 144 MHz, 220 MHz, or 430 MHz as the primary TX/RX band, while simultaneously monitoring up to 3 other frequencies or channels. Configure your device for VHF-VHF, VHF-UHF, or UHF-UHF operation according to your needs. Suggested Accessories for Peak Performance: Optimize your UV-25X4 experience with the Nagoya TB-320A Tri-Band Antenna for easy installation and the PC04 FTDI Cable for seamless computer programming. Effortless Installation and Adaptable Use: The UV-25X4 comes with all necessary mounting hardware for smooth integration into any vehicle. Easily convert it into a home or office base station with the optional RPS-30M power supply (sold separately). Enhanced Audio I/O Support: The UV-25X4 features upgraded audio input/output capabilities through its RJ45 microphone port and includes a K1 audio adapter. The widely compatible K1 accessory jack allows access to a vast range of aftermarket audio accessories, tailoring your radio experience to your preferences.