2 User Mode
The AILE blood pressure machine can record up to 99 independent data from 2 users simultaneously (2*99). Data is automatically recorded after each measurement (with time stamp). It is convenient for you to review your measurements and observe the change of data. More convenient than a manual blood pressure machine.
Common reasons for inaccurate measurements.
1. The cuff is too tight or too loose. When measuring blood pressure, the cuff should be tightened appropriately. Too tight or too loose will have a greater effect on the blood pressure value (it is best to keep 2 fingers free between the cuff and the arm) The cuff is tied 2 to 3 cm above the elbow joint of the arm.
2. Incorrect position of the blood pressure measurement. When measuring blood pressure, the arm should be positioned correctly and the height of the sphygmomanometer, the cuff and the heart should be the same, otherwise the results will be affected.
3. Inadequate self-preparation: being in an emotionally unstable state when measuring blood pressure, or not resting after strenuous exercise, talking while taking blood pressure, etc. will usually result in a high measured blood pressure value; (no food, water or exercise for 30 minutes before the measurement and emotional stability)
Tip: If you are emotionally stable, the blood pressure measured will be more accurate, otherwise high mood swings will interfere with the measurement, no matter what blood pressure monitor is used.
4. Do not compress any blood vessels on your body during the measurement. (including but not limited to stretching your legs, improper measurement position, clenching your fists, bending over, sitting cross-legged or curled up on a sofa or low table) can cause local pressure. Please take measurements in the correct sitting position (please refer to the instructions).
5. Inaccurate measurements can also occur when the electronic blood pressure monitor is low on power (replace the batteries or use the USB cable).
6. One inaccurate measurement does not mean an immediate alarm. Multiple measurements should be taken, each one more than one minute apart.
7. Other cases of inaccuracy : 1 8888750846.