Features 240 x 320 resolution, 65K RGB colors, clear and colorful displaying effect, SPI interface, minimizes required IO pins, supports controller boards like Raspberry Pi/Arduino/STM32, Comes with development resources (examples for Raspberry Pi/Arduino/STM32) Specifications Operating voltage:3.3V Resolution:240 x 320 pixels Communication Interface:4-wire SPI Display size:36.72 x 48.96mm Display Panel:TFT Pixel size:0.153 x 0.153mm Driver:ILI9341 Dimensions:70.50 x 43.30mm Controlled via SPI Bus supports controller boards like Raspberry Pi/Arduino/STM32 VCC:Power (3.3V input) GND:Ground DIN:SPI data input CLK:SPI clock input CS:Chip selection, low active DC:Data/Command selection (high for data, low for command) RST:Reset, low active BL:Backlight Package Content 2.4inch LCD Module x1 PH2.0 20cm cable x1

Comes with development resources (examples for Raspberry Pi/Arduino/STM32). Pixel size:0.153 × 0.153mm. Dimensions :70.50 × 43.30mm. Display Panel:TFT . Operating voltage:3.3V. Display size:36.72 × 48.96mm. 4-wire SPI Interface,embedded ILI9341 driver, using SPI bus.Supports controller boards like Raspberry Pi/Arduino/STM32. 2.4" LCD Display Module, 65K RGB Colors, 240×320 Resolution, 65K RGB colors, clear and colorful displaying effect.