Functions : The SATA-defined M.2 hard disk KEY-B-M of the motherboard is transferred to the SATA 22PIN interface. This adapter card only connects signals from the M.2 hard drive to the SATA 22PIN connection so that the adapter card does not have to be controlled. If you cannot recognize the hard drive, please check whether it is an M.2 interface. The card generally does not work, please note. Supports all SATA standards M2.SSD, does not support the new NVME M2.SSD. Important to say three times, Does NOT support PCI-E M2 SSD, do not understand and read 3 times! !! !! : 1: This card is suitable for 4 different SSD hard drive lengths, suitable for 3 cm, 4.2 cm, 6 cm, 8 cm and other M2 ( NGFF)) SSD hard drive lengths. Ceramic filter capacitor, high performance LDO voltage regulator control chip, stable performance! Our products are tested before shipping. The riser card only changes the interface shape of the solid state hard drive and does not change the performance of your hard drive. What are your original hard drive parameters,The output interface performance does not change with the riser card. Specification: Product type: M.2 NGFF-to-SATA adapter Port: M.2 NGFF SATA 22PIN Supported system: For WinXP / Vista / Win7 / Win8 32-digit / 64-digit MAC / LINUX Suitable SSD length: 3 cm / 1.2 inches, 4.2 cm / 1.7 inches, 6 cm / 2.4 inches, 8 cm /3.1in. (Note: This product cannot be applied to PCIE NVMe / PCIE AHCI M.2 SSD with the "M" key.) Package size: Approx. 12 * 8 * 1.5 cm / 4.7 * 3.1 * 0.6 in ?If you are not sure whether this card is suitable for your SSD, please feel free to contact us. Packaging content: 1 * M.2 NGFF to SATA adapter 1 * 4-pin + SATA 7-pin to 22-pin cable 4 * screws See more

This adapter card only connects the signal from the M.2 hard drive to the 22PIN SATA connector, so the adapter card does not require a driver. Just changing the shape of the SSD interface doesn't change the performance of your hard drive. M.2 KEY SSD can use 2.5-inch hard drive, support high-speed SATA3 / 6Gbps high-speed storage interface. Only the SATA logo on the SSD is applicable to this riser card. PCI-E M.2 which does not support NVME and AHCI. It supports all SATA M2.SSD standards. Multi-system compatibility: Support WinXP / Vista / Win7 / Win8 WIN10 32-bit / 64-bit / MAC / LINUX?Support M2 (NGFF) SSD size: 2230, 2242, 2260, 2280mm. ?Note: NGFF M.2 interface is divided into B-M KEY.✓This adapter card supports B-KEY;(?NOT supports M-Key!!)(?NOT supported M.2 NVME and PCI-E SSDs). NGFF to SATA III Adapter Card : It can transfer M.2 SSD (NGFF) to a standard SATA interface through this card, then connect to the computer host for data transmission and support system boot function. (M.2 NVME and PCI-E SSDs not supported).