Package include:
✓9 in 2 set: 2 Pcs x Clear nail stamper, 2 Pcs x Spatula, 4 Pcs x Nail Art Stamper Heads, 1 x Nail Stamper Plate
✓4 in 1 set: 1 Pcs x Clear nail stamper, 1 Pcs x Spatula, 2 Pcs x Nail Art Stamper Heads
How to Use:
1.Take out the print head, use cotton dipped in water to scrub the glue head several times to make it easier to transfer the pattern.(If the nail stamper cannot pick up the pattern well in use, you can try to clean the surface of the seal with clean water before use to make it wet, and the use effect of nail polish glue is better.)
2.After a simple repair and cleaning of the nails, a coat of nail polish can be applied.
3. Apply nail stamping polish to desired image within a plate; Scrape across plate with the scraper to remove excessive polish; (Use the scraper at 45-degree angle)
4. Quickly press the stamper onto the plate to pick up the design, stamp the image onto your nail with a rolling motion or just press down and lift up immediately.
5. Press the stamp on the pattern, and then print it on your nails. For lasting, apply the top coat slightly and quickly.
6.When applying nail polish and printing patterns, try to finish it at one time to avoid scratching the surface of the nails; if you don't do it well, you can quickly wipe it off and try again.
7.Finish with a varnish to protect the pattern to avoid scratching or fading.
8.Finally, you can use a cotton swab dipped in nail polish remover to clean the steel plate, scraper and print head.
9.Be careful of scratches when using steel plates and scrapers.