BeElion 2 Port POE Extender 100Mbps with IEEE 802.3af Standard for NVR IP Camera AP IP Voice POE Extend 100 Meters for POE Range (1In/2Out PoE Extender)

BE SAFE

WE ONLY SOURCE

FROM OFFICIAL SUPPLIERS

From United States

To International

In 5-10 Days

US$19.99 Shipping Fees for any Order

GRAND SELECTION

Think of it and most probably we have it among our grand selection of products!

AMAZING PRICES

Get ready for the amazing and best Supps prices ever!

FIXED RATE DELIVERY

Get your order anywhere on this planet within 5-10 days with a fixed rate of $19.99 (no matter the size of your order)

+1 (844)-467 8777

PHONE:

+1 (844)-467 8777

BeElion 2 Port POE Extender 100Mbps with IEEE 802.3af Standard for NVR IP Camera AP IP Voice POE Extend 100 Meters for POE Range (1In/2Out PoE Extender)

Regular Price: US$35.99

Special Price US$29.99

Availability: In stock

Supplier: BeElion

Category: Electronics Computers & Accessories Networking Products Network Adapters Powerline Network Adapters

Qty:

Frequently bought together :

Price for all selected :

US$49.98

BeElion POE Extender 2 Port PoE-Powered PoE-sourcing ethernet Switch Repeater 100m 1 in 2 Out Comply IEEE 802.3af/at Standard 10,100Mbps for Security Camera Over Cat5/Cat6 or UTP Cables


Input and Output 1-Port PoE Extender has 2 10/100Mbps LAN ports, among them, one for power input, the other for power output. Comply with 10/100BASE TX,IEEE802.3af(PoE). Power input for single port is 13W. Power output for single port is 12.2W.	Product Overview POE Extender is a cost effective way to extend the Ethernet network range beyond 100M or 120M, delivering both data and power to network devices such as WLAN Access Points and Network Cameras up to a distance of 200m while complying with IEEE PoE and Data standards. The PoE Extender supports 10/100Mbps data rates and delivers 802.3af power levels, up to 15.4W, The PoE Extender does not require local power and is powered via the PoE input. Extended PoE installation range by additional 100M or 120M	Device Application Used with AP, IP camera, IP telephone and the other network equipments in the situation of the lack of power line or far away from the power outlets. Installed at hotels, schools, buildings, villages, etc.

2 Port POE Extender 100 Meters(328 ft) Extender 1 in 2 Out IEEE 802.3af/at Standard 10,100Mbps for Security POE Camera Over Cat5/Cat6 or UTP Cables

Detailed Product Parameters

POE input: 1 RJ45 port (DC 44-57V, 802.3at),POE output: 2 RJ45 port (48V, 802.3af),
POE Pin Output: 1/2(+), 3/6(-); MAX Power 15W
Network Medium: Cat5 or better UTP cables (less than 120m)
Repeater Mode: Store and forward
MAC Address Table: 2K
Packet Buffer Memory: 48 Byte
Switching Capacity: 1.0Gbps
PoE Standard: IEEE 802.3af
Input power: 13 Watts,Output power: 12.2 Watts
Power Supply Type: 1/2+,3/6-,Mode A, End-Span
Network Protocol: IEEE 802.3i-10BASE-T, IEEE 802.3u: 100BASE-TX, IEEE 802.3x-Flow Control, IEEE 802.3af-Power over Ethernet;
Regulation Compliance: FCC Part 15B, ROHS Directive 2011/65/EU, Low Voltage Directive 2014/35/EU,EMC Directive 2004/108/EC;
Working temperature: -10°c to 45°c, Working Humidity: 5%~90%, No Condensation;
Dimension: 44x88x22mm / 2.95'' x 3.46'' x 0.86'', Weight: 52g

Note:

Please don't place any heavy thing on the PoE extender;
To prevent the water seeping into the extender, please keep PoE extender away wet environment;
Suggest to use PoE extender indoors. When installing the extender in outdoor, please install it in a waterproof place.

The PoE Extender cost effective installation - does not require local power and other configuration required. Powered via the PoE input, Plug and Play. Automatically detects and protects PoE equipments from being damaged by incorrect installation. It can forward both Ethernet and PoE power for 1 terminal equipment via Cat5,Cat5e,Cat6,UTP cable(less than 120m). Supports 10,100Mbps data rates, comply with IEEE802.3at and IEEE802.3af Standard. Provides 802.3af power levels when powered by any 802.3at source. The PoE Extender features Power input for one port is 13W. Power output for four port is 12.2W. The POE extender can extend the range of the Ethernet network by an additional 100m (328 ft). Extended PoE installation range by additional 100M. The maximum is 6 pieces, 700 meters (2296ft) when deployed in cascade.