-Specification- CPU: MediaTek MT7988A (Filogic 880) Quad-Core Arm Corex-A73,1.8GHz Processor SDRAM Memory: 4GB DDR4 memory Onboard Storage: 8GB eMMC, support MicroSD (TF) cardholder GPIO: 26 Pin GPIO, 26 Pin GPIO, supports UART, I2C, SPI, PWM, I2S. Network Interface: 4 Port 10/100/1000Mbps Gigabit Ethernet Port SFP Optical Ports: 2x10G SFP optical ports or 1x10G SFP optical port plus 1x 2.5GbE port mini PCIE: 2x miniPCIe PCIe3.0 interfaces supporting Wi-Fi 7 NIC (Network Interface Card) M.2 interface. 1x M.2 KEY-B interface using USB3.2, supports 5G, 1x M.2 KEY-M interface adopts PCIe3.0 interface, supports NVME SSD hard disks USB: 1xUSB 3.2 Interface Buttons: Reset button, WPS button, boot switch button Leds: Power status Led and RJ45 Led DC Power: 12V/5.2A or 19V 3.2A Dimension: 100.5x148x20mm Weight: 250g -Package Content- Banana Pi R4 Router Board x1 12V 2A power supply x1 Debugging serial port x1 Heat sink x1 -Technical Support- * Wiki:"wiki.banana-pi.org/Banana_Pi_BPI-R4". * Getting Started with BPI-R4: "wiki.banana-pi.org/Getting_Started_with_BPI-R4". * Please click "WayPonDEV" and ask a question. * Please leave the message "wpd#youyeetoo&com (#--->@,&--->.)" or skype: monica_9122. See more

[Wiki] SDK Document: "wiki.banana-pi.org/Banana_Pi_BPI-R4"; All after-sales questions please click "WayPonDEV" store and ask the question. Or please leave the message to "wpd#youyeetoo&com (#--->@,&--->.)". [Application Scenarios] Banana Pi BPI-R4 Router Board can be applied to Internet service Router, Wifi 7 Wireless Router, 4G/5G Wireless Router, Wireless Repeater, Home security Gateway, Home Automation, Nas device, Gaming Wifi Routers, Network and Communication Applications. It can be used as 36Gbps Wi-Fi 7 Access Point Router Gateway. [Rich Peripheral interfaces] Banana Pi BPI-R4 wireless router board onboard 2x 10Gbe SFP Optical ports, 4x Gbe Gigabit LAN ports, 1x USB3.2 port, 3x Nano SIM Slot, 1x M.2 KEY-B connector for 5G, 1x M.2 KEY-M connector for 2280 SSD, mPCle Slot for Wi-Fi NIC, 1x MicroSD Slot(TF), 1x Debug UART port, 1x 26 Pin GPIO, supports UART, I2C, SPI, PWM, I2S. [Support 2x 10Gbe SFP/4x Gbe] Banana Pi BPI-R4 wireless dual-band wifi router board support 2x 10Gbe SFP and 4x Gbe ethernet with 4 Port 10/100/1000Mbps Gigabit Ethernet port, also with USB3.2 port and M.2 interface, support 4G/5G signal reception and NVME SSD.Providing the fastest and most reliable network connection. [Support WiFi7 iPA NIC Module] Banana Pi BPI-R4 wireless three-band router board onboard 2x miniPCIe slots with PCIe3.0 2lane interface for Wi-Fi 7 NIC (Network Interface Card). MediaTek MT7988A enables seamless Wi-Fi 7 tri-band, 2.4 GHz.5 GHz and 6 GHz connectivity, with its Wi-Fi 7 companion chip that features 320-MHz bandwidth, 4096-QAM, MLO, MRU and AFC. [High Performance Chips] The MediaTek MT7988A SoC is the world's leading network processing platform that delivers a high-performance and reliable network experience for wired and wireless applications. At the same time, the MT7988A is equipped with MediaTek's Tunnel Offload Processor System (TOPS), which easily handles a wide range of tunneling protocols. [MediaTek MT7988A CPU] Banana Pi BPI-R4 Router Board with MediaTek MT7988A (Filogic 880) quad-core ARM Corex-A73 CPU design, 4GB DDR4 RAM 8GB eMMC and 128MB SPI-NAND flash onboard, works as 36Gbps Wi-Fi 7 access point/router/gateway. It is also a very high performance open source router development board.