Oiling Instructions

IMPORTANT! It is highly recommended before each use to oil the blades with the oil provided. This ensures optimum cutting performance.

For the first use you will need to use the oil supplied with the product, unscrew the cap and cut off the very end of the plastic tube with a pair of scissors to release the oil. To oil the blades ensure the unit is switched on. Gently squeeze the oil tube and apply 2 drops of oil onto the blades. Leave the unit on for a further few seconds to allow the oil to thoroughly spread the length of the blades. Switch off the unit and remove any excess oil by gently dabbing with a cloth.

CLEANING & MAINTENANCE

For easy cleaning, the blades on your BaByliss For Men clipper are removable. Regular cleaning will maintain their high performance level.

To clean proceed as follows:

• Switch the appliance off and unplug at the mains supply.
• Remove any comb guides. Rinse the comb guide under running water and dry thoroughly before storage or use.
• Remove the blades carefully noting which way round they are fitted. This will help with re-assembling.
• Remove the two screws from the large fixed blade and detach this blade.
• Now brush away the hair and other debris from the interior of the cutting head and blades.
• •Re-assembly is simply the reverse of the above instructions.
• Finally, before fully tightening the two screws in the large blade, to void injury ensure that the blades are correctly aligned. With the aper control lever fully forward, the tips of the small blade must be parallel with and 1mm below the tips of the large blade. Also check that the extreme left hand tooth of the small blade is inside the large blade. (Failure to do so could cause injury).
• Carefully tighten the two screws in the big blade, taking care not to disturb the above correct position of the blades.