AUVON Lancing device for blood testing

The feature of AUVON Lancing device

1: Multi-track design for less pain.

2: One-Button Lancet Rejection.

3: Precision depth setting.

How to use:

Preparing your lancing device

1: Pull off the cap. Carefully remove the cap from the lancing device

2: Insert a lancet & remove its cap. Insert the lancet into the lancet holder, push until the lancet comes to a complete stop inside the device.

3: Place device cap back.

4: Personalize penetration depth. For fingertip lancing, you can adjust the depth of puncture setting if necessary

5: Pull out the button.

6: Load the lancing device. Pull the handle to make a click sound, if it does not click, it may already have been loaded when you inserted the lancet.

Lancing fingertips

7: Prior to sampling blood, wash your hands and the simple site with soap and warm water. Rinse and dry your hands completely.

8: Punture your finger. Press the lancing device firmly against the side of your fingertip to be lanced. Press the release button. Remove the lancing device from your finger.

9: Get a round drop of blood.

Removing and disposing of the used lancet

10: Remove cap. Carefully remove the cap from the lancing device. Be careful not to touch exposed needle on the lancet.

11: Eject the lancet. Simply eject the used lancet with a push and dispose of it according to local regulations.

Use precautions:

1: Never share a lancet or lancing device with another person.

2: Make sure to wash the puncture site with soap and warm water before sampling.

3: For single person use only. Not for clinical or multi-patient use.

4: Keep your lancing device clean. Hand lotions, oils, dirt and debris on or in the lancing device may prevent the device from working correctly.