AURSINC MMDVM Hotspot Spot Radio Station WiFi Digital Voice Modem Work Contained with Raspberry Pi Zero W with Firmware V4.1.5 UHF Supports C4FM YSF POCSAG NXDN DSTAR P25 DMR MMDVM FM 4.1.5

BE SAFE

WE ONLY SOURCE

FROM OFFICIAL SUPPLIERS

From United States

To International

In 5-10 Days

US$19.99 Shipping Fees for any Order

GRAND SELECTION

Think of it and most probably we have it among our grand selection of products!

AMAZING PRICES

Get ready for the amazing and best Supps prices ever!

FIXED RATE DELIVERY

Get your order anywhere on this planet within 5-10 days with a fixed rate of $19.99 (no matter the size of your order)

+1 (844)-467 8777

PHONE:

+1 (844)-467 8777

AURSINC MMDVM Hotspot Spot Radio Station WiFi Digital Voice Modem Work Contained with Raspberry Pi Zero W with Firmware V4.1.5 UHF Supports C4FM YSF POCSAG NXDN DSTAR P25 DMR MMDVM FM 4.1.5

Regular Price: US$233.99

Special Price US$194.99

Availability: In stock

Supplier: AURSINC

Category: Electronics Computers & Accessories Computer Components Single Board Computers

Qty:

Frequently bought together :

Price for all selected :

US$684.97

AURSINC MMDVM Hotspot Spot Radio

MMDVM Hotspot (USB Cable)	MMDVM Hotspot (Ethernet cable)	MMDVM Nano Hotspot
Content Equipped with USB cable.	Content Equipped with USB Wire LAN adapter.	Host NanoPi NEO 512M RAM,v1.4,A3 Architecture
Firmware Version With Firmware V4.1.5	Firmware Version With Firmware V4.1.5	Built-in Wifi Module Allwinner H3 RAM 512MB Ubuntu Ready

MMDVM Hotspot (USB Cable)

MMDVM Hotspot (Ethernet cable)

MMDVM Nano Hotspot

Content

Equipped with USB cable.

Content

Equipped with USB Wire LAN adapter.

Host

NanoPi NEO 512M RAM,v1.4,A3 Architecture

Firmware Version

With Firmware V4.1.5

Firmware Version

With Firmware V4.1.5

Built-in Wifi Module

Allwinner H3 RAM 512MB Ubuntu Ready

Product Details

Quad Core A7 1.2GHz Processor, 512mb DDR3 RAM and 8gb TF Card

Built-in LED indicators for status of Power, PTT, COS and Mode

Assembly Details

One fully-assembled device host include:

one MMDVM hotspot board with OLED display

one Raspberry Pi Zero W

one Antenna (with 90 degree elbow)

Description

Power supply: Mobile charger or a USB cable connected toyour computer or laptop.

Built-in oled system status indicating Mode, Talk Group and Call Sign

Features

Supports PI-STAR's web based digital voice dashboard and configuration tool

The Hotspot will work in vehicle if Tether it to your mobile phone network

Base Setting

Radio Freq: UHF(430-440), VHF(144-146)

When you first time set up, MMDVM hotspot will generete pi-star set up hotspot, which you'll connect with, and goes into pi-star and then visit 192.168.50.1 for configuration.

Power On and Wait for 2-3 minutes Connect to Pi-Star-Setup(pi-star)/SSID/PASSWORD: raspberry

192.168.50.1/admin/configure.php
MMDVM Host Configuration

Radio/Modem Type: STM32-DVM/MMDVM_HS – Raspberry Pi Hat(GPIO) or any XXX(GPIO)

MMDVM Display Type: OLED

192.168.50.1/admin/expert/edit_mmdvmhost.php

RXOFFSET=0,TXOFFSET=0 (default)

TIPS:OLED is no display Until you set wifi and display TYPE
Login info

Software: Pi-Star; User: pi-star; Password: raspberry

Set the same Frequency, Callsign, DMR ID, Color code, Repeater Slot(Time Slot Defaults 2) as Radio Mobile and WiFi Details

Note: All designs will be contributed on MMDVM open source project

Note: Analog radio USB is not supported
Important Note

MMDVM Hotspot is a Multi-mode Hotspot, supports C4FM YSF NXDN DSTAR P25 DMR

If you connected to your home network/wifi, it will remember your home wifi. When open pi-star and update your configure, there will be no pi-star wifi.

If you came across this situation, here're two methods to log in and update you configure:

A, Visit [pi-star] on your browser, log in pi-star and configure. If you're on macOS, iOS or Windows 10 tablet, please visit [pi-star.local].

B, Find your Device IP on your home network routers, and log in with that IP, and update your configure.
Package Content

Equipped with USB cable, No Ethernet cable

1x OLED display (installed on board);

1x Raspberry Pi Zero W; 1x MMDVM_HS(UHF+VHF)

1x TF card; 1x USB Cable; 1x Antenna (with 90 degree elbow)

amazon.com/dp/B088PPDRT7?ref=myi_title_dp&th=1
Package Content

Equipped with Ethernet cable

1x OLED display (installed on board)

1x Raspberry Pi Zero W; 1x TF card; 1x MMDVM_HS(UHF/VHF)

1x Antenna (with 90 degree elbow); 1x Ethernet Cable

amazon.com/dp/B088PP3TVR?ref=myi_title_dp

If you encounter some issues with the device during usage, how to self-check the fault?

Please check the live log file in the configuration or downloading it for us to diagnose and provide a solution. For further info, please access the website: amateurradionotes.com/pi-star-notes.htm

Unable to get 'wifi' pi-star to appear to login to device.

This device is directly connected to the computer, so it will not be displayed whether the WiFi is logged in or not.

How to display the IP address on the OLED, is it a setting in pi-star to turn it on?

Just Enable DSTAR mode, you can see the IP on OLED now.

When log on to the pi-star wifi it says the default password is incorrect. what would it be other than raspberry?

Password only this password “raspberry”, please brush the system to try again.

The state of the lights at work. Make noise when plugged in. OLED display went out within hours.

When Red Light flashing behind case, it's works. Please configure Wi-Fi or call sign, Mode, just to see pi-star panel to see what happen.You can download live log file to see what happen, OLED don't work if don't select gpio modem, start with manual.

I updated and lost factory settings. What modem type do I select? Try to configure for YSF but have no network activity

OLED 3. The modem is GPIO, after configuring the modem will the network be available.

How to connect between the Jumbo hotspot and the ZyXel C1100Z modem /router?

Obtain the WiFi account number of your router (phone's hotspot function, when activate hotspot, change the pass/SSID in Settings). Then use the WiFi builder web page to generate the file and save it to card, or connect it directly via a network cable

Heard a rattling in the case. Sounds like a small screw bouncing around in there.

The screws inside the equipment may have become loose. In case of any looseness, remove and reinstall the screw. Reassess functionality after reinstallation to determine if the product can be used again.

If you encounter that the device cannot connect to network after setup, please reflash the SD Card by using the firmware package, the path for the package: drive.google.com/file/d/1pL8077KkEVoKuIXHsdQVQgsH3FY8CFZf/view?usp=sharing if it still not working, please reach out to us through mail, we will address your issue asap. ?NOTE?This product comes with USB Cable. No Ethernet Cable. If you encounter that the device cannot connect to network after setup, please email us, we will address your issue asap. Not compatible with Baofeng UV-5R, Baofeng RD-5R, 5X, 5R+, 5R Plus, etc UV series, BF series. More product setup guide, please read the product manual or contact us, we will reply within 24 hours. ?EASY CHARGING?Free micro USB charging cable included, charged with power bank or connect to laptop or computer. The Hotspot will also work mobile in your vehicle if you tether it to your mobile phone network. ?WIFI SSID?Need the 2.4GHz SSID as the Pi Zero W doesn't support 5.8GHz. And WiFi will not work with WEP, make sure your WiFi Password Type is WPA. Power on the hotspot for 2 minutes to automatically connect to the network, or follow the instructions to connect the Hotspot to your router. After power on 2 minutes, goto http://pi-star/admin/configure.php. ?EASY SET UP?Preload sofeware Pi-Star on TF card, no need to download again. Radio Frequency: (UHF:430-440) This is upgraded version, do not need to set RXOFFSET and TXOFFSET, they're default 0. Note: when you flash the TF card with new version software, please DO NOT copy on the TF card directly, use a write in tool to write the software on TF card. ?Firmware 4.1.5?In the latest batches shipped to warehouse, the problem has been solved, we have preload the firmware 4.1.5. If you receive a old firmware device and there's update trouble, please contact us, so that we can provide support and help. Our test is in DMR mode, if you want to change the working mode, you need to configure it as needed Working mode parameters. SUPPORT: C4FM YSF NXDN DSTAR P25 DMR and default work with UHF.