Specification:

Size: 0.96

Resolution: 128X64

Color: Blue Viewing angle: greater than 160 degrees

Supported platforms: for arduino, 51 series, MSP430

series, STIM32 / 2, SCR chips

Low power consumption: 0.04W during normal operation

Support wide voltage: 3.3V-5V DC

Working temperature: -30-80 degrees

Volume: 27MM * 27MM * 4.1MM

Driver IC: SSD1306

Communication: IIC, only two I / O ports

No font: The software takes word modulo

Backlight: OLED self light, no backlight

Interface:

VCC: 3.3-5V GND: Ground

SCL: Serial Clock

SDA: Serial Data

Features:

This OLED display module is small, only 0.96” diagonal, it is made of 128x64 individual yellow and blue OLED pixels, each one is turn on or off by the controller chip.

It works without backlight, that is, in a dark environment OLED display is higher compared to that of LCD display you will like the miniature for its crispness.

The Driver chip of this OLED is SSD1306, which is compatible with IIC communication. So this module can be controlled by I2C.

That is, except the VCC and GND, 2 wires would be needed when using 4-wires I2C mode.

There is also a simple switch-cap charge pump that turns 5v into a low voltage drive for the OLEDs, making this module the easiest ways to get an OLED into your project.

Applications:

MP3, MP4, watch;Head-mounted displays

Meters and other intelligent instruments

Design any pretty patterns for your beloved electronic devices!

Package included:

1/2 * 0.96 Inch I2C OLED Display