Q&A:
How should I adapt to the initial stage of wearing a hearing aid?
People with hearing loss are no longer sensitive to many sounds. After putting on hearing aids, they can hear the original inaudible sound again, causing maladjustment. This is a normal phenomenon.
Solution:
1.In the previous week, don’t wear it for more than one to three hours per day,appropriately increase the wearing time every day depending on your own situation.
2.The use time can be increased to 4 to 5 hours in the next week.
3.According to customer test feedback, usually about 2 to 3 weeks, you can adapt to our hearing aids.Remember not to wear the hearing aid right away to go in a noisy environment.
How to prevent howling?
Howling is actually acoustic feedback. The amplified sound leaks through the aperture and is re-received by the hearing aid microphone, resulting in cyclic amplification and causing howling.It is normal for the hearing aid to squeal when wearing a hat, with the palm of your hand close to the hearing aid or close to the wall.
Solution:
1.Choose the earplugs that fit your ear size.
How to switch modes, what kind of environment does each of the four modes adapt to?
Our hearing aids can switch between four modes with one 'M' key.
Solution:
1.Press the M key, if it with one beep,at this time, it is in non-noise reduction mode,will amplify all sounds.Suitable for indoor use without noise.The default is non-noise reduction mode when power on
2.Press the M button, with two beeps, enter the noise reduction mode.Automatic noise filtering, can filter noisy sounds when you are in a noisy environment
3.Press the M button, with three beeps,enter the low frequency mode.Suitable for daily communication.
4.Press the M button, with four beeps,enter high frequency mode.Suitable for outdoor use.
Anyway,you can choose a comfortable mode, according to your own situation.
TIPS:
1.Please use a cotton swab to clean the ear canal before wearing.If the cerumen is too much,it will block the sound outlet of the product and cause no sound
2.Need to keep the sound inlet of the hearing aid clean.
3.When the hearing aid keeps beeping, the sound becomes smaller, and it does not work properly, it indicates that the power has been reduced. At this time, please charge the product. When charging, turn the switch of the host to "0".