NOTE: All of our 4pin backup cameras can't be connected directly with any other monitors(no matter DVR or dashcam or whatever) which is not compatible with RCA video input.
* Please test the back up cameras before final installation.
* There is a pink color wire on your head unit usually, please connect it with the 26FT video cable's trigger wire. If your head unit doesn't have reversing trigger wire, then no need to use the trigger wires on the video cable.
* Some cheap/old Android head units may also have the setting for AHD video signal , but they can't display any AHD image, because they don't support AHD at all. If so, then you can only apply CVBS video signal, hope you understand.
* Before you routing, if there is no image on the screen, other than check the camera, please check display settings as well. You can use other device with RCA connector, such as TV to check if the camera works.
* If you connect the backup camera for pickup to a FACTORY RADIO, please order a suited Harness & Programmer separately, because different RADIO needs different Harness & Programmer.
Package:
1. 1 * AHD1080P Backup Camera 2. 1 * 26FT Double Shielded Video Cable 3. 1 * 5FT Power Cable 4. 1 * Metal Holder set 5. 1 * Accessory Bag for Metal Holder 6. 1 * Silicone Holder
7. 1 * Accessory Bag for Silicone Holder 8. 1 * User Manual 9. 1 * Adhesive Tape 10. 1 * Removal Tool 11. 5 * Zip Ties 12. 5 * Wire Clamps 13. 1 * Mini Screwdriver
14. 1 * Electric Adhesive Tape 15. 2 * T-tap Sets