Add two M.2 SATA SSDs and two SATA ports to your computer through PCI Express. The Ableconn PEXM2-2SA is a 2-port SATA III PCIe host controller combined with two M.2 NGFF SATA SSD slots. It supports hardware RAID and Hybrid drive modes so you can leverage the speed of SSDs and capacity of HDDs.
Features
* Connector:
- 2x B-key (type 22110-D5-B) M.2 socket for M.2 NGFF SATA based SSD
- 2x 7-pin SATA connectors
- 1 x 4-pin small Molex power connector (optional connection for high power M.2 SSDs)
* Chipset: Marvell 88SE9230
* System Requirement:
- An empty PCIe x4, x8, or x16 slot.
* Two (2) 6 Gbps SATA III host Ports and two (2) M.2 sockets on board
* PCI Express 2.0 x4 Lane Host adapter (electrically a x2 Lane card) low-profile form factor board equipped with a full-profile bracket, and include a low-profile for small form factor computers.
* Compliant with 5Gbps PCI Express 2.0
* Fully compliant with Serial ATA specifications 3.0
* Supports SATA III transfer rate of 6.0Gbps, 3.0Gbps, 1.5Gbps
* Supports Native Command Queuing (NCQ) as well as ATA and ATAPI commands
* Support one (1) FIS-based or Command-based Port Multiplier with up to four (4) drives through PM. The board supports up to seven (7) drives in total.
* Three Pin headers on board for LED connection
* Movable M.2 NGFF stand-off and multiple plated-holes supports type 22110, 2280, 2260 and 2242 M.2. Supports M.2 NGFF 110mm, 80mm, 60mm, 42mm SSDs.
* Operating temperature range: 0 - 60 °C
* Storage temperature range: -40 - 75 °C
* Fully RoHS compliant
* Made in Taiwan