The Ableconn IIDE-MSAT let you convert an mSATA SSD into a standard 9.5mm high 2.5” IDE SSD drive. It provides excellent heat dissipation for mSATA SSD drive with the open aluminum frame design.

Features

* Connector:

- 1 x mSATA (52-pin, Mini SATA) Receptacle

- 1 x IDE (44-pin, PATA) Male

* Controller:

- Marvell 88SA8052

* Data transfer rate:

- Up to 150 MB/s

* Convert Full Size mSATA SSD to High Performance, No Noise, Low Power 44Pin 2.5” IDE SSD

* Supports SATA I, SATA II and SATA III (6Gbps) mSATA SSD

* Latch type mSATA connector on board, no need the screw to retain mSATA SSD

* 100% Compatible with 2.5” IDE drive mechanical spec

* 48 bits LBA can Break Capacity-Limit to Support mSATA SSD max 144,115,188GB

* Compliant with Serial ATA 2.6

* Jumper setting support IDE Master, Slave and Cable Select Modes

* Tag Command Queuing (Max 32 entries) * ATA/ATAPI PIO mode data transfer

* ATA/ATAPI UDMA data transfer rate of 150, 133, 100, 66, 44, 33, 25, 16.7 MB/s

* ATA/ATAPI-7 Streaming feature set

* Includes 9.5mm height 2.5 “ drive metal frame with 8 mounting holes and 4 HDD screws

* Dimension of PCBA with 2.5” frame : 98mm x 69.85mm x 9.5mm

* Fully RoHS compliant

* Made in Taiwan