1--How to turn on/off recording?

1) Turn the power button to the "ON" position, and the recorder will automatically start recording after it is turned on.

The system initializes (3-4 seconds, the indicator light displays red and blue at the same time) and starts recording automatically.

2) When the power switch is turned to the "OFF" position, stop and automatically save the recording and turn off the power.

(The red/blue indicator light flashes twice and then goes out, indicating that the recording has been saved and the power is turned off)

3) A maximum of 999 files can be recorded. Please clean the recording files in the recording folder regularly.

2--How to play Recording playback/MP3 music playback?

After the device is powered on (turn the power button to the "ON" position), plugging Type C into the built-in player and headphones will automatically switch to playback mode. Press the "Play" button once and the recorder will automatically play the latest recording (the blue light flashes when playing music, the red light flashes when playing voice, and the indicator light stays on when pausing playback)

3--How to play Recording/MP3 music/pause/volume control/play switch/delete recording on the recorder?

1) Start playing recording/MP3 music: Plug in the wired controller headphones and short press (1 second) the "Play" button on the headphones to play the recording/MP3 music.Tip: After the recorder is connected to the wired control headphones, you need to briefly press (1 second) the "play" button to play music/MP3 music. When there is no recording file, MP3 music will be played automatically.

2) Pause playback: In the playback state, short press (1 second) the "play" button of the wire-controlled headset-linked recorder to pause playback.

3) Play next song/recording: During playback, short press (1 second) the "VOL+" or "VOL-" key to select the previous or next song/recording.

4) Recording/MP3 music playback switching: When the recorder is playing recording/MP3 music, press and hold (2-3 seconds) the "Play" button to switch between recording and MP3 music modes (red light indicates once), and the switch can be repeated.

5) Volume: During playback, press and hold (2-5 seconds) the "VOL+" or "VOL-" key to adjust the volume.

6)Delete recording files/MP3 music files?

Step:

1. Short press (1 second) the "Play" button to pause playback;

2. Press and hold (2-3 seconds) the "VOL+" key to enter the deletion state. At this time, the red and blue lights will light up at the same time;

3. Press the Play button briefly (1 second) to confirm deletion. At the same time, red and blue lights alternate rapidly to indicate successful deletion (each operation can only delete the currently playing file);

4. Short press (1 second) the "VOL-" key to exit deletion.

4-- Does the recorder have a smart voice activated Recording function? The default setting of the recorder is to turn off the intelligent voice-activated recording function (intelligent recording starts when there is sound, and does not record when there is no sound). To enable this function, you need to modify the VOR parameters in the “MRECSET.txt” file. 0 means off, 1-7 means on. It is recommended to turn on the intelligent voice-activated recording function. Setting value 3.

5-- Does the recorder support mobile phone connection? The recorder has an external Type C interface and supports the connection of Android Type C interface mobile phones and iPhone 15 (Type C) mobile phones. After connection, the