5inch IPS Touch Screen Display for Raspberry Pi DSI Interface 800 480 Resolution Capacitive Touch Panel Supports Raspberry Pi OS/Ubuntu/Kali / WIN10 IoT and Retropie up to 5-Points Touch 5inch DSI LCD (B) Display

BE SAFE

WE ONLY SOURCE

FROM OFFICIAL SUPPLIERS

From United States

To International

In 5-10 Days

US$19.99 Shipping Fees for any Order

GRAND SELECTION

Think of it and most probably we have it among our grand selection of products!

AMAZING PRICES

Get ready for the amazing and best Supps prices ever!

FIXED RATE DELIVERY

Get your order anywhere on this planet within 5-10 days with a fixed rate of $19.99 (no matter the size of your order)

+1 (844)-467 8777

PHONE:

+1 (844)-467 8777

5inch IPS Touch Screen Display for Raspberry Pi DSI Interface 800 480 Resolution Capacitive Touch Panel Supports Raspberry Pi OS/Ubuntu/Kali / WIN10 IoT and Retropie up to 5-Points Touch 5inch DSI LCD (B) Display

Regular Price: US$95.99

Special Price US$79.99

Availability: In stock

Supplier: Ingcool

Category: Electronics Computers & Accessories Computer Components Single Board Computers

Qty:

User guide 1. Hardware connection 1) Using the FFC cable, connect the 5inch DSI LCD to the DSI port of the Raspberry Pi. 2) For easy use, you can fix the Raspberry Pi on the backside of the 5inch DSI LCD by screws. 2. Software setting Supports Raspberry Pi OS / Ubuntu / Kali / WIN10 IoT and Retropie systems for Raspberry Pi. 1) Download image from the Raspberry Pi website. 2) Download the compressed file to the PC, and unzip it to get the .img file. 3) Connect the TF card to the PC, use SDFormatter software to format the TF card. 4) Open the Win32DiskImager software, select the system image downloaded in step 2, and click ‘Write’ to write the system image. 5) After the image has finished writing, save, and quit the TF card safely. 6) Power on the Raspberry Pi and wait for a few seconds until the LCD displays normally. And the touch function can also work after the system starts. 3. Backlight Controlling 1) Open a terminal and type the following command to adjust the brightness. Note: If the command reports the 'Permission denied' error, please switch to the 'root' user mode and execute it again. echo X > /sys/class/backlight/rpi_backlight/brightness X can be value in range 0~255. The backlight is darkest if you set it to 0 and the backlight is set to lightest if you set it to 255 echo 100 > /sys/class/backlight/rpi_backlight/brightness echo 0 > /sys/class/backlight/rpi_backlight/brightness echo 255 > /sys/class/backlight/rpi_backlight/brightness 2) We can provide a example for brightness adjusting, you can download and install it. NOTE: Development Resources and Technical Support are provided, please feel free to contact us if you have any problem! 4. Package Content 1) 5inch DSI LCD (B) x1 2) FPC 15PIN 1.0 pitch 50mm (opposite sides) x1 3) Screws pack x1

Power supply via Pogo pin. Low power consumption. Adjustable brightness via software. When used with Raspberry Pi, support Raspberry Pi OS, 5-points touch; support Ubuntu / Kali / WIN10 IoT, single point touch; support Retropie, driver free. 5inch DSI LCD display supports Raspberry Pi 4B/3B+/3A+/3B/2B/B+/A+, another adapter board is required for CM3/3+/4. 5inch IPS screen, 800x480 hardware resolution, DSI interface, refresh rate up to 60Hz, toughened glass capacitive touch panel, support 5-points touch, driver free.