HUBANFLY - car partner, the faithful companion.

This UHD 4K+1080P dual dash cam support built-in WIFI and GPS, that starts recording at the same time when the car engine starts, a high-resolution CMOS sensor, WDR, F1.8 large aperture, G-sensor mode, starlight night vision, 24H parking monitoring mode, and reverse assist mode. The camera of the dash camera is divided into two parts, front and rear, which will protect your car in all directions.

• Please format the memory card in the camera settings before recording for the first time. It is recommended to select a high-speed brand card (Class 10/U1 or above). 64GB-128GB memory card is the best choice.
• Please keep the car charger of the dash camera connected to the power supply.
• Although the dash cam has a built-in battery for emergency recording, please keep the car charger of the dash cam connected to the power supply.
• Please be aware of that it is normal when the memory card be warming after long-time use.
• This dash camera is equipped with an external memory card. If you want to view the recorded video of the dash camera, please take out the memory card separately and read the video data in the computer. (Keep the connection stable when transferring data to avoid data corruption caused by interruption of transfer)

How to install the holder :

Use the holder mount to install the dash cam on the windshield. The recommend place is near the rear view mirror facing front, adjust the angle of lens for the best coverage over the hood and the road ahead, so camera can record what happens.

1. Please wipe the dust or water stains on the windshield with a clean cloth before installing the suction cup.
2. After determining the position, press the suction cup on the windshield, and then slide the small handle on the suction cup to the right to lock it. In this way, the suction cup will be tightly attached to the windshield. It can be easily removed by sliding to the left when removing.

How to connect to WIFI:

1. First, you need to download the APP on your phone according to the instructions.

2. Turn on the dash cam, and the WiFi icon is displayed as shown in the left figure (All icons will be hidden after 5 seconds without operation, you need to press any key to display the icons. ). Long press the UP button to enter the WiFi mode, as shown in the right figure: The WiFi hotspot name is SBC_ xxxxxx,the password is 12345678.(Tips:After the mobile phone is connected to the dash cam through WIFI, you cannot make any settings on the dash cam. If you need to set it, you can use the APP.)

3. After the mobile phone is connected to the WiFi hotspot name, open app, click the device icon in the middle to enter the image screen.

• (1) At the beginning of default recording, you can click the Record icon to stop recording. You can also click the Photo button to take photos.(Note: When the mobile phone and the dash cam are synchronized via WIFI, the mobile phone stops recording, the dash cam will also stop recording, and the mobile phone and the dash cam will save the recorded video at the same time.)
• (2) Browse the video in the dash cam card: click the Video / Photo icon.
• (3) Download the files in the dash cam card. Click " Select " to select multiple files, download the files to the mobile phone, or delete the files in the memory card. (Note: Videos containing emergency wake-up recordings cannot be deleted on the mobile phone.)

4. Track of browsing video files. After the phone is connected to the dash cam via WIFI, the downloaded video will be saved to the phone memory first. The mobile phone is connected to the data network. Open App, click the album and enter the file browsing screen. If the video file has GPS information, the video will be automatically loaded into the GPS track.

Smart Parking Guard voice reminder:

• When a collision occurs during parking, it will give a voice reminder ‘You have new parking surveillance video ’ to save the collision video during parking for you to view.
• Only English instructions are supported.

How to install the front dash cam:

1. First you need to install the suction cup holder.
2. Connect the power cable (car charging power cable or USB cable) between the cigarette lighter (USB port) and the front dash cam, and use the cable clips provided to hide wire inside the the interior trim board for better appearance and avoid that children fuss with the wires.

How to install the rear dash cam:

1. First at all, in order to power the rear camera, you need to connect the rear dash cam with its own power cable to the front dash cam.
2. Then in order to clearly capture the 140° rear vehicle situation, the rear dash cam needs to be installed on the rear window or above the license plate. For more durability, you can mount the rear dash cam to the rear window or license plate using the accessories in the kit as instructed to prevent it from falling.
3. The excess red wire near the rear camera is used for reversing. Connect the red wire from the rear camera to the power positive wire of reversing light, the parking guide line of rear camera will show when the reverse gear engaged.

Complete installation line display and attention points:

• The rear dash cam is powered by the front dash cam, please keep the rear dash cam connected with the front dash cam.
• The rear dash camera is in mirror mode, all signs and license plates are upside down, please turn off the mirror mode in "Settings" before use.
• No need to connect the red wire of rear dash camera with the reverse lights if you don't want rear guidance when put the car in reverse gear, and the dash cam will still record both front and rear.
• Please correct the posi ion of the dash camera before installation, and check whether the wire of the rear dash camera is long enough before installation to avoid reinstallation due to insufficient length.
• It is recommended to install it under the guidance of professionals. Those who have experience in the installation of dash camera can install it by themselves.