Please note: This PoE injector only compatible PoE enable devices , data rate is 10/100Mbps, it cannot work with Gigabit Devices. Feature: This PLUSPOE PoE injector adapter allows an Ethernet-enabled device to be placed 328ft away from a power outlet. Ethernet terminals such as wireless LAN access point, IP phone, and web camera are powered remotely. It is especially design for outdoor networking facility and low port density installations. Applications: IP Phone Wireless Access point and client devices Security IP Camera Systems Specification: Input: AC100-240V 50/60Hz, Data In: Connects to network switch or router, Output: Data & Power (output voltage: 48V, output current: 0.5A max.); Power feed: V+ 4,5; V- 7,8; Date: 1,2, 3,6; Data rate: 10/100Mbps; PoE Power Transmission Distance: Up to 100m Indicator: The LED shows Red when power on, then it turn to Green when connected Correct PoE device, it will be blinking when has fault. Package Contents 1x 48V0.5A Wall Plug PoE Injectors

Compact and cost effective PoE injector which offer multiple protection, such as over current protection, over load protection, over voltage protection and anti-interference protection. Plug & play, no configuration is needed, simply connect a PoE network device to this poe adapter, accommodates most installations scenarios. Compatible with Ubiquit POE-48-24W, POE-48-24W-WH, Also works most 802.3af PoE enable Devices. Support 10/100M IEEE802.3af PoE injector (15.4 watt), up to 24 watt Power Budget (increase of service life0. Converts a non-PoE port to a PoE port and Network a PoE device located up to 100 meters (328 ft.) away.