3M Rugged Comfort Quick Latch Half Facepiece Reusable Respirator 6502QL Gases Vapors Dust Large

BE SAFE

WE ONLY SOURCE

FROM OFFICIAL SUPPLIERS

From United States

To International

In 5-10 Days

US$19.99 Shipping Fees for any Order

GRAND SELECTION

Think of it and most probably we have it among our grand selection of products!

AMAZING PRICES

Get ready for the amazing and best Supps prices ever!

FIXED RATE DELIVERY

Get your order anywhere on this planet within 5-10 days with a fixed rate of $19.99 (no matter the size of your order)

+1 (844)-467 8777

PHONE:

+1 (844)-467 8777

3M Rugged Comfort Quick Latch Half Facepiece Reusable Respirator 6502QL Gases Vapors Dust Large

Regular Price: US$104.99

Special Price US$89.99

Availability: In stock

Supplier: 3M Personal Protective Equipment

Qty:

Wear It Right (always read and follow user instructions)


Step 1 Place the respirator over the mouth and nose, with bottom straps unfastened. Place the top strap over your head, placing the head cradle on the crown of your head.	Step 2 Grasp the straps, place them at the back of the neck and hook them together.	Step 3 Adjust strap tension by pulling ends until a secure fit is obtained. Balance strap tension by adjusting the top and bottom strap buckles. Do not overtighten.

Check the Seal of Your 3M Half Facepiece Reusable Respirator Each Time You Don the Respirator


Positive Pressure User Seal Check Cover the opening in the exhalation valve cover with your hand. Be careful not to disturb the position of the respirator. Exhale gently. If the facepiece bulges slightly and no air leaks are detected between your face and the facepiece, a proper seal has been obtained.* *If faceseal air leakage is detected, reposition the respirator on your face and/or readjust tension of the straps to eliminate the leakage. If you cannot achieve a proper seal, do not enter contaminated area. See your supervisor.	Negative Pressure User Seal Check Using hands, press or squeeze filter covers toward facepiece to restrict airflow. Be careful not to disturb the position of the respirator. Inhale gently. If you feel the facepiece collapse slightly and pull closer to your face with no leaks between your face and the facepiece, a proper seal has been obtained.*	Using 3M Cartridges Place the palms of your hands over the cartridges and inhale gently. The facepiece should collapse slightly. If air leaks between the face and the faceseal of the respirator, reposition it and adjust the straps for a tighter seal. If you cannot achieve a proper seal, do not enter the contaminated area. See your supervisor.*	Using 3M Particulate Filters Place your thumbs onto the center portion of the filters, restricting airflow into the respirator tube of the filters. Be careful not to disturb the position of the respirator. Inhale gently. If you feel the facepiece collapse slightly and pull closer to your face with no leaks between your face and the facepiece, a proper seal has been obtained.*


	3M 6500QL Half Facepiece Respirator	3M 7500 Half Facepiece Respirator	3M 6300 Half Facepiece Respirator	3M 6000 Series Full Facepiece Respirator	3M FF-400 Series Full Facepiece Respirator	3M 7800S Full Facepiece Respirator
Enhanced Durability	✓	✓			✓	✓
Enhanced Comfort	✓	✓		✓	✓
Drop-Down Feature	✓	✓	✓
3M Cool Flow Valve	✓	✓
Compatible with 3M Supplied Air System		✓	✓	✓	✓	✓
Compatible with 3M PAPR Systems	✓	✓	✓	✓	✓	✓
Eye Protection				✓	✓	✓
Six-Point Head Harness					✓	✓
Silicone Faceseal	✓	✓		✓	✓	✓
Compatible with Welding Shield	✓		✓

<td class="apm-tablemodule-valuecell a


	3M Multi Gas Vapor Cartridge/Filter P100	3M Organic Vapor/Acid Gas Cartridge/Filter P100	3M Acid Gas Cartridge/Filter P100	3M Acid Gas Cartridge	3M Ammonia Methylamine Cartridge/Filter P100	3M Formaldehyde Organic Vapor Cartridge/Filter P100
Part Number	60926	60928	60922	6002	60924	60925
NIOSH Color Code	Magenta Olive	Magenta Yellow	Magenta White	White	Magenta Green	Magenta Black Olive
Chlorine and Hydrogen Chlorine	✓	✓	✓	✓
Sulfur Dioxide	✓	✓	✓	✓
Chlorine Dioxide	✓		✓	✓
Hydrogen Sulfide	✓	✓	✓	✓
Particulates	✓	✓	✓		✓	✓
Ammonia	✓

COMPATIBLE: Bayonet connection is compatible with all 3M bayonet style cartridges and filters. REDUCES FOGGING: Exhalation Valve Cover Directs Exhaled Breath and Moisture Downward to Reduce Fogging of Face Shields. LOW PROFILE: Half Face Piece Design Offers a Wide Field of View and Compatibility With Welding and Grinding Shields. DURABLE: Resilient Silicone Faceseal Provides Comfort, Durability, and Stability With a Soft but Firm Seal. Keeps Its Shape in High Heat Environments. COOL COMFORT: Proprietary 3M Cool Flow Valve Is Designed for Easy Exhalation to Help Keep the Wearer More Comfortable. COMFORTABLE: Adjustable Head Harness Assembly Promotes a Comfortable Fit With 3 Size Adjustable Head Cradle; Long Lasting Polyester/Spandex Straps. EASY ON AND OFF: Quick Latch Design Offers an Easy, 1 Hand Touch Drop Down Mechanism for Putting the Face Piece on and Off While Moving in and Out of Contaminated Areas. Made in the USA.