Description: New and Made of high-quality materials, durable 1 pair of fiber electrode 3/5/7 fusion splicer for INNO IFS-15 IFS-15H IFS-10 view Installation and maintenance Type: optical fiber electrode View 3, View 5, View 7 Discharge time: 3000 times Electrode replacement method: Fir st of all, make sure that the welding machine is closed. Remove and release the protective cover of the electrode compartment. Fix the upper electrode and remove the upper electrode. Then release the top. Connect the lower electrode and remove the lower electrode. Next, install a new electrode. The steps are reversed to the following method Remove the electrode. You can do it inside. The difference between the two Both electrode tips must be 2.6 +/- 0.2 mm. Finally, do not touch the tip of the electrode during the assembly process. Prevent electrode damage and avoid electrode damage Fall into the machine. After replacing the electrode, the arc position should be Calibration. Electrode cleaning and Arc calibration: After installing the electrode, turn on the power switch of the welding machine. Implementation. After the welding machine enters the initial screen, press the menu key to enter the first-level menu. Move the cursor to find the machine repairman and input the cleaning electrode. After confirmation, the machine will automatically discharge and clean the aging electrodes. Install the cut left and right optical fiber, move the optical fiber to find the curved position cursor, and maintain the position between the three-point and the single-wire optics. The tip of the fiber and two electrodes pass through. The discharge test will be carried out by the machine and can be adjusted according to the actual situation. Finally, press the menu key to exit. Package Included: 1 pair * optical fiber electrode

?Electrode Cleaning and Arc Calibration?After electrode installation, easily clean and calibrate the arc position using the welding machine's menu. Ensures precise and accurate fusion splicing. ?Optimal Discharge Time?Capable of enduring up to 3000 discharges, guaranteeing reliable and efficient fusion splicing. ?Easy Installation and Maintenance?Simple electrode replacement method, with clear instructions provided. Just follow the steps to replace the electrodes effectively. ?Compatible with INNO IFS-10/15/15H View 3/5/7?Specifically designed for INNO fusion splicers, including IFS-10, IFS-15, IFS-15H, and View 3, 5, 7 models. ? Fiber Fusion Splicer Electrodes?These electrodes are made of durable materials, ensuring and long-lasting performance.