2 Sets LoRa32u4ii Lora Development Board Module JST-PH2.0mm-2P Connector IPEX Antenna ATmega32u4 SX1276 HPD13A 915MHz 868MHz for Arduino UNO Mega 2560 Nano

BE SAFE

WE ONLY SOURCE

FROM OFFICIAL SUPPLIERS

From United States

To International

In 5-10 Days

US$19.99 Shipping Fees for any Order

GRAND SELECTION

Think of it and most probably we have it among our grand selection of products!

AMAZING PRICES

Get ready for the amazing and best Supps prices ever!

FIXED RATE DELIVERY

Get your order anywhere on this planet within 5-10 days with a fixed rate of $19.99 (no matter the size of your order)

+1 (844)-467 8777

PHONE:

+1 (844)-467 8777

2 Sets LoRa32u4ii Lora Development Board Module JST-PH2.0mm-2P Connector IPEX Antenna ATmega32u4 SX1276 HPD13A 915MHz 868MHz for Arduino UNO Mega 2560 Nano

Regular Price: US$77.99

Special Price US$64.99

Availability: In stock

Supplier: Stemedu

Category: Electronics Computers & Accessories Computer Components Single Board Computers

Qty:

Frequently bought together :

Price for all selected :

US$139.97

DIY0050 LoRa32u4 II Lora Development Board

Features of LoRa32u4 II Lora Development Board

1. Does not require high power unlike WiFi, but offers long range.

2. The ATmega32u4 is clocked at 8 MHz and 3.3 V. This chip has 32 K of flash, 2 K of RAM and built-in USB to Serial communication, debugging and programming capabilities without the need for an external FTDI chip.

3. It can also act as an HID device (mouse, keyboard, USB MIDI device, etc).

4. This board is also equipped with a LiPo and Liion charging circuit and a standard battery interface. It is fully compatible with Arduino.

Description:

ATmega32u4 @ 8MHz with 3.3V logic/power
3.3V regulator with 500mA peak current output
USB native support, comes with USB bootloade and serial port debugging
Built in 100mA lipo charger with charging status indicator LED
With Reset button
Working voltage: 1.8 ~ 3.7V
Receive current: 10 ~ 14mA
Interface Type: SPI
Operating temperature: -40 ° C to + 85 ° C
Digital RSSI function
Automatic frequency correction
Automatic gain control
Radio wake-up function
Low voltage detection and temperature sensor
Fast wakeup with frequency hopping
Highly configurable packet handlers


LoRa32u4 II Lora Development Board Document link: http (:) //www (DOT) diymalls (DOT) com/files/DIY0050-DIY0051-LORA32U4.zip https (:) //drive (DOT) google (DOT) com/open?id=0B8DSGdAr8_31RkQ0UGo2Nzh1YXM	2DBi IPEX to SMA Antenna 2DBi IPEX to SMA Antenna 868MHz 915MHz U.FL to Female SMA I-PX Extension Pigtail Cable Description: Frequency:850-960/1710-1880MHz Type: U.FL to Female SMA Impedance: 50 ohms Gain: 2DBi	JST-PH2.0MM-2P Terminal Connector Cable Description: Electronic wire: UL1007-26AWG standard line 7 / 0.16MM 80 degrees 300V Outside diameter: 1.3MM Using Terminal Model: JST-PH2.0MM spacing -2P Color arrangement: The first hole is black line = 96MM The second hole is red line = 88MM Tail Popi: 2MM green on the tin

Package includes:

2 X LoRa32U4 II Lora Module development board
2 X JST-PH2.0MM-2P Terminal Connector Cable
2 X 2DBi IPEX to SMA Antenna


	LoRa32u4 II Lora Development Board	Capacitive Analog Soil Moisture Sensor Module	HC-SR501 Infrared PIR Motion Sensor	DHT11 Humidity and Temperature Sensor Module	LXW5-11N1 Microswitch SPDT 1NO 1NC Micro Limit Switch	110dB High-Decibel Active Buzzer
Type	Stemedu 2 Sets LoRa32u4ii Lora Development Board Module, JST-PH2.0mm-2P Connector, IPEX Antenna, ATmega32u4 SX1276 HPD13A 915MHz 868MHz, for Arduino UNO Mega 2560 Nano	Stemedu 5PCS Capacitive Analog Soil Moisture Sensor Module 3.3~5.5V Corrosion Resistant Humidity Detection Sensors DIY Electronic for Arduino Raspberry Pi	Stemedu HC-SR501 PIR Motion Sensor Infrared IR Body Motion Detectors Module for Arduino Raspberry Pi(Pack of 5pcs)	Stemedu DHT11 Humidity and Temperature Sensor Module 3.3V-5V Digital Temp Humidity Sensor 20%~90% RH Humidity Measure Range 0~50? Temperature Measure Range (Pack of 5)	Stemedu 4PCS LXW5-11N1 Microswitch SPDT 1NO 1NC Micro Limit Switch Hinge Lever Momentary Push Button Switches 3A AC380V DC220V (Pack of 4)	Stemedu 5 PCS DC 6-15V Electronic Buzzer Alarm Siren - 12V Active Buzzer Sounder - Continuous Beep Piezo Buzzers - 110dB High-Decibel


	ESP32-S2-Saola-1R Development Board	ESP32-PICO-KIT V4.1 Development Board	ESP32-S3-DevKitC-1-N8R8-development-board	USB to ESP01 ESP8266 Wifi Programmer	Multicolored Dupont Wire Breadboard Jumper Wires Ribbon Cable	Double-Sided Protoboard PCB Board
Type	ESP32-S2 ESP32-S2-Saola-1 Microcontroller Processor Module 4MB Flash + 2MB PSRAM ESP32-S2-WROVER Development Board Wi-Fi MCU Module for Ardunio IDE	ESP32-PICO-KIT V4.1 ESP32 Development Board WiFi + Bluetooth Dual Modes USB-UART 4MB flash Microcontroller Module for Arduino	ESP32-S3 ESP32-S3-DevKitC-1 N8R8 Development Board based on ESP32-S3-WROOM-1 module, 8 MB Quad flash and 8 MB Octal PSRAM, SPI Interface WiFi +Bluetooth 2 in 1 Microcontroller for Arduino IDE	2PCS USB to ESP8266 Adapter Module ESP-01 Prog ESP-01S Programmer Downloader CH340C Driver with Reset Button, Easy to use	240pcs Multicolored Dupont Cable 20cm 10cm Breadboard Prototyping Wires 40pin M-M, 40pin M-F, 40pin F-F Jumper Wire Kit for Arduino DIY Project (8" and 4")	42PCS Solderless Double-Sided Protoboard Universal PCB Board Prototype Kit Electronic Breadboard with 6 Sizes (2x8 3x7 4x6 5x7 6x8 7x9cm) for Arduino DIY Project

Ideal for creating long range wireless networks that can exceed 2.4 GHz 802.15.4 and similar, it is more flexible than Bluetooth LE, does not require high power unlike WiFi and offers long range. HPD13 wireless module: high-performance, highly integrated RF transceiver chip SX1276, Long communication distance, high anti-jamming, low current consumption, higher reception sensitivity performance. Interface Type: SPI. LoRa32u4 II is a light and low consumption board based on the Atmega32u4 and HPD13 915MHz LoRA module and an USB battery charging circuit. Document link https(:)//tinyurl(dot)com/lora32u4ii.