1. Enter the vehicle, close, and unlock all doors using the power lock switch on the driver’s door.
2. Insert an ignition key(recommend using the old key), and turn to the ON position-number 2 (will turn the radio), don't start the engine.
3. And then press and release the LOCK button, and turn the ignition key to off. So if you see right there are number so this is 0 1 2 , and press the lock button,and urn the ignition key to off . Repeat 4 times. And turn ignition key to on number 2 position.
4. Press the lock button within 4 seconds , and then press the unlock button. The door locks should automatically lock and unlock indicating that the remote programming has been accepted.
5. Repeat STEP 4 for all remaining remotes you wish to program (You can program up to 4 remotes total).
6.Once you have programmed all your remotes, exit the programming mode by turning the key off and removing it from the ignition.
7.Test all remotes to ensure they are functioning. If any do not function, restart the programming procedure from STEP 1.
Tips: THE ANTI-THEFT CHIP can only be replaced with an old key or programmed by dealer/locksmith.