Technical Specifications: ACC mode Input: 13V-36V | Output: 5V/2.1A Surveillance mode Input: 11.6V-36V | Output: 5V/2.1A Lengh: 3.5meters(11.5 ft) Interface: mini USB Q & A about our OBD power cable: Q: Can this obd cable can used for all cars/Vans? A: as long as they have an obd port+ your dash cam's charger is mini USB Port, PLEASE NOTE: NOT SUITABLE FOR THE TRAM(ELECTRIC VEHICLE) Q: When the customer just inserted the OBD into the car, no matter which mode the OBD chooses at this time, there is output . A: Because this process is the process of the OBD program chip starting detection, it will be normal after 20 minutes. Q: What can we do if this power cable not suitable for our car? A: Please feel freely contact with our seller, we will help you. PRESS RED BUTTO TO SWITCH 2 MODES: Mode “O”: ACC mode: When your car ACC is off, the OBD power cable will also power off after 20 minutes. Mode “—”: Surveillance mode: When you car ACC is off, the OBD power cable will keep working until detecting the car battery voltage is at 11.6V(low voltage), it will power off after 5min. (Because the power of each car changes differently, some errors in the power failure time are normal) The low voltage protection for mode “—” protect your car from running out the battery, enable you have enough voltage to start the car for next driving. PLEASE NOTE: 1.This car OBD, OBD2 power cable is only working for dash cams which range from 8V-36V,other voltage range is not supported. The voltage will be converted to 5V output. 2.This car charger adapter is suitable for 16pin OBD and OBD2 ports. It is only used for charging. 3.We are committed to provide our customers high quality products and service, If you have any questions, please feel free to let us know. We will reply you as soon as possible within 24 hours. Thank you.? 100 Score After-sale Service?ANY USING QUESTION, PLEASE FEEL FREE CONTACT WITH US, WE MUST 100% RESPONSIBLE FOR OUR ITEM. ? Using Prerequisites ? Your car has the OBD Port & your dash cam has the Mini USB Port. ?Specification of OBD Camera Power?OBD camera power cable with mini usb port, Cable length:3.5meter(11.5 ft),Input: 12V-26V | Output: 5V/2.1A. ?High Compatibility Car Cam Charger?Best dash camera power cable for Jeep Cherokee, Chevrolet, Toyota, trucks, etc., as long as you have the OBD Port. (Except Electric Vehicles , which are not suitable, electric vehicles voltage is not changed) Specially designed for dash cam GPS navigator, DVR, radar detector and more mini usb port devices. ?Plug and Play OBD Power Adapter?Dash cam power cable obd2 cable makes your 24-hour monitoring easier. No Wiring Fuse Operations, more convenient than all dash cam hardwire kit. Directly connect the OBD port with the dash car camera. ? MODE 2 ? PRESS THE RED BUTTON SWITCH TO" MODE O": THIS IS ACC MODE. at THIS MODE YOUR DASH CAMERA WILL TURN ON/ OFF WHEN YOUR CAR TURN ON/OFF. ? MODE1 ? PRESS THE RED BUTTON SWITCH TO" MODE -": at THIS MODE YOUR DASH CAM WILL KEEP RECORDING 24 HOURS NO MATTER YOUR CAR TURN ON OR OFF. SUITABLE for PARKING MONITOR. ?2 Mode with Switch Button?Mode Surveillance, realize really 24-hour parking monitoring. Mode ACC, the obd hardwire kit will power off within 20-30 minutes when car turns off. The function of ACC is realized by detecting the voltage of the car. Within 20 min Since the electric quantity of the customer's car is still higher than 12.8V under flame out (our detection standard is 13V, the lowest is 12.8V), This 20 minutes is aimed at most cars in this range can be lower than 12.8V. ?Low Voltage Protecting?OBD2 dash cam power cable which has a built-in intelligent program control chip. (Electric vehicles are not suitable, electric vehicles voltage is not changed)Accurately detect the car battery voltage, constant12V/24V voltage to 5v. When the battery voltage is lower than 11.6V, will stops working to prevent the battery from wasting power.
